Vorrätig Top‑Produkt
UDPHL113
UDPHL113 DPH-L113 PANASONIC Sensor head DPH-L113 for positive pressure, 0 to 1.0MPa, R1/4 male thread, cable..
$0.00USD
3290 auf Lager
Wichtige Spezifikationen
Artikel:Specifications
Kabel:0.2 mm23-core heat resistant cabtyre cable 2 m3.562 ftlong
Bemerkung:Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉.The sensor head can be used independently.
Gewicht:Net weight : 100 g approx., Gross weight : 150 g approx.
Lieferanteninformation
PANASONIC
Produkte: 4316
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Kabel | 0.2 mm23-core heat resistant cabtyre cable 2 m3.562 ftlong |
| Bemerkung | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉.The sensor head can be used independently. |
| Gewicht | Net weight : 100 g approx., Gross weight : 150 g approx. |
| Details | Sensor head |
| Produkt | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] |
| Material | Diaphragm : Stainless steel (SUS603), Pressure port : Stainless steel (SUS304), Throttle : Stainless steel (SUSXM7) |
| Schutz | IP67 (IEC) |
| Zubehör | Connector (e-CON) : 1 pc. |
| Teilenummer | DPH-L113 |
| Produktname | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] DPC-L100 / DPH-L100 |
| Druckanschluss | R1/4 male thread (throttle embeded) |
| Ansprechzeit | 1 ms or less |
| Produktnummer | DPH-L113 |
| Versorgungsspannung | 9 to 36 V DC[9 to 32 V DC when using the attached connector (e-CON)] |
| Kabelverlängerung | Extension up to total 10 m32.808 ftis possible with 0.2 mm2, or more, cable. |
| Umgebungsfeuchtigkeit | 35 to 85 % RH, Storage : 35 to 85 % RH |
| Geeignete Flüssigkeit | Gases and fluids that do not corrode stainless steel SUS630, SUS304, or SUSXM7 |
| Erdungsmethode | Capacitor earth (Enclosure-supply terminal) |
| Stoßfestigkeit | 1,000 m/s2acceleration in X, Y and Z directions three times each |
| Druckart | Sealed gauge pressure(Note): The sensor's internal mechanism is sealed based on an air pressure of 1,013 hPa. |
| Verbindungsmethode | Connector |
| Umgebungstemperatur | -20 to +70 ℃-4 to +158 ℉(No dew condensation or icing allowed),\n Storage: -30 to +70℃-22 to +158 ℉ |
| Aktueller Verbrauch | 20 mA or less |
| Nenndruckbereich | 0 to +1 MPa |
| Vibrationsfestigkeit | 10 to 2,000 Hz frequency, acceleration 200 m/s2, in X direction for four hours, in Y and Z directions for two hours each(Note): The X, Y, and Z directions are defined as follows : |
| Analoger Spannungsausgang | Output voltage: 1 to 5 V DC (over rated pressure range)\n Accuracy: ±1.0 % F.S. (at 23 ±2 ℃+73.4 ±35 ℉)\n ±2.0 % F.S. (at -20 to 70 ℃-4 to +158 ℉)\n (including linearity, hysteresis and repeatability) |
| Isolationswiderstand | 100 MΩ, or more, with 50 V DC megger between all supply terminals connected together and enclosure |
| Anwendbare Vorschriften | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Mittlerer Temperaturbereich | -20 to +70 ℃-4 to +158 ℉ |
| Spannungsfestigkeit | 150 V AC for one min. between all supply terminals connected together and enclosure |
| Druckbeständigkeit | 2 MPa |
Produktbeschreibung
Sensor head, positive pressure. 0 to 1MPa. R1/4 male pressure port.
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
