

| Parameter | Wert |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Codierung | D |
| Allgemein | Contact connection method: Crimp connection |
| Abgeschirmt | yes |
| Bussystem | PROFINET |
| Kabeltyp | Sercos III [93K] |
| Kopfdesign | Socket |
| Sicherheitshinweis | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Sensortyp | PROFINET |
| Gewindeart | M12 |
| Kabellänge | 2 m |
| Kabelgewicht | 68 kg/km |
| Produktart | Data cable preassembled |
| UL AWM-Stil | 21694 (60 °C / 600 V) |
| Gesamtwendung | Star quad |
| Dichtungsmaterial | FKM |
| Signallaufzeit | 5.3 ns/m |
| Wellenimpedanz | 100 Ω ±15 Ω (at 100 MHz) |
| AWG-Signalleitung | 22 |
| Artikelüberarbeitung | 10 |
| Flammbeständigkeit | according to UL 1685 (CSA FT 4) |
| Kopfgewindetyp | M12 |
| Andere Widerstände | UV resistant (according to UL 1581, Section 1200) |
| Verbindungsmethode | Cable connection |
| Kabelausgang am Kopfende | straight |
| Kopfverriegelungstyp | SPEEDCON |
| Beständigkeit gegen Öl | Resistant to oil to a limited extent |
| Anzugsmoment | 2 Nm ... 3 Nm (Installation-side) |
| Leitermaterial | Tin-plated Cu litz wires |
| Kontaktwiderstand | ≤ 3 mΩ |
| Nennstrom IN | 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed) |
| Nennspannung UN | 250 V |
| Einzeldraht, Farbe | white, yellow, blue, orange |
| Leiterstruktur | 1x4xAWG22/7, SF/TQ |
| Kopplungswiderstand | ≤ 20.00 mΩ/m (at 10 Hz) |
| Verschmutzungsgrad | 3 |
| Maßzeichnung | |
| Anzahl der Positionen | 4 |
| Bemessungsstoßspannung | 2.5 kV |
| Übertragungsmedium | Copper |
| Schutzgrad | IP65/IP67 |
| Anzahl der Kabelanschlüsse | 1 |
| Überspannungskategorie | II |
| Signalart/-kategorie | PROFINET CAT5 (IEC 11801:2002), 100 Mbps |
| Standardbezeichnung | M12 connector |
| Isolationswiderstand | ≥ 100 MΩ |
| Äußere Hülle, Farbe | signal red RAL 3020 |
| Nennspannung, Kabel | 600 V |
| Äußere Hülle, Material | PVC |
| Prüfspannung Kern/Kern | 2000 V (50 Hz, 1 min.) |
| Art der Paarschirmung | Aluminum-lined polyester foil |
| Leiterquerschnitt | 4x 0.34 mm² |
| Kontaktverbindungstyp | Socket |
| Außendurchmesser des Kabels | 6.50 mm ±0.2 mm |
| Dicke, äußere Hülle | approx. 0.90 mm |
| Kontaktträgermaterial | PA 6.6 |
| Kontaktflächenmaterial | Ni/Au |
| Material Drahtisolierung | PE |
| Normen/Spezifikationen | IEC 61076-2-101 |
| Prüfspannung Kern/Abschirmung | 2000.00 V (50 Hz, 1 min.) |
| Maximaler Leiterwiderstand | ≤ 120 Ω/km |
| Einführ-/Entfernungszyklen | ≥ 100 |
| Werkstoff für Schraubverbindung | Brass, nickel-plated |
| Drahtdurchmesser inkl. Isolierung | approx. 1.55 mm |
| Umgebungstemperatur (Betrieb) | -40 °C ... 70 °C (cable, fixed installation) |
| Leiterstruktur-Signalleitung | 7x 0.25 mm |
| Umgebungstemperatur (Installation) | -20 °C ... 60 °C |
| Brennbarkeitsklasse gemäß UL 94 | V0 |
| Übertragungseigenschaften (Kategorie) | CAT5 |
| Minimaler Biegeradius, feste Installation | 3 x D |
| Kleinster Biegeradius, feste Installation | 20 mm |
| Minimaler Biegeradius, flexible Installation | 7 x D |
| Kleinster Biegeradius, bewegliche Installation | 46 mm |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung