Servicezeiten: Montag bis Freitag 9:00-18:00
VS-FSDBPS-OE-93K-LI/0,5 - VS-FSDBPS-OE-93K-LI/0,5 1419154 PHOENIX CONTACT Bus system cable
Vorrätig Top‑Produkt

VS-FSDBPS-OE-93K-LI/0,5

VS-FSDBPS-OE-93K-LI/0,5 1419154 PHOENIX CONTACT Bus system cable

$0.00USD
4132 auf Lager
Wichtige Spezifikationen
:• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Codierung:D
Allgemein:Contact connection method: Crimp connection
Abgeschirmt:yes
Lieferanteninformation
Produkte: 0
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support

Technische Spezifikationen

ParameterWert
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
CodierungD
AllgemeinContact connection method: Crimp connection
Abgeschirmtyes
BussystemPROFINET
KabeltypSercos III [93K]
KopfdesignSocket
SicherheitshinweisWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
SensortypPROFINET
GewindeartM12
Kabellänge0.5 m
Kabelgewicht68 kg/km
ProduktartData cable preassembled
UL AWM-Stil21694 (60 °C / 600 V)
GesamtwendungStar quad
DichtungsmaterialFKM
Signallaufzeit5.3 ns/m
Wellenimpedanz100 Ω ±15 Ω (at 100 MHz)
AWG-Signalleitung22
Artikelüberarbeitung10
Flammbeständigkeitaccording to UL 1685 (CSA FT 4)
KopfgewindetypM12
Andere WiderständeUV resistant (according to UL 1581, Section 1200)
VerbindungsmethodeCable connection
Kabelausgang am Kopfendestraight
KopfverriegelungstypSPEEDCON
Beständigkeit gegen ÖlResistant to oil to a limited extent
Anzugsmoment2 Nm ... 3 Nm (Installation-side)
LeitermaterialTin-plated Cu litz wires
Kontaktwiderstand≤ 3 mΩ
Nennstrom IN4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Nennspannung UN250 V
Einzeldraht, Farbewhite, yellow, blue, orange
Leiterstruktur1x4xAWG22/7, SF/TQ
Kopplungswiderstand≤ 20.00 mΩ/m (at 10 Hz)
Verschmutzungsgrad3
Maßzeichnung
Anzahl der Positionen4
Bemessungsstoßspannung2.5 kV
ÜbertragungsmediumCopper
SchutzgradIP65/IP67
Anzahl der Kabelanschlüsse1
ÜberspannungskategorieII
Signalart/-kategoriePROFINET CAT5 (IEC 11801:2002), 100 Mbps
StandardbezeichnungM12 connector
Isolationswiderstand≥ 100 MΩ
Äußere Hülle, Farbesignal red RAL 3020
Nennspannung, Kabel600 V
Äußere Hülle, MaterialPVC
Prüfspannung Kern/Kern2000 V (50 Hz, 1 min.)
Art der PaarschirmungAluminum-lined polyester foil
Leiterquerschnitt4x 0.34 mm²
KontaktverbindungstypSocket
Außendurchmesser des Kabels6.50 mm ±0.2 mm
Dicke, äußere Hülleapprox. 0.90 mm
KontaktträgermaterialPA 6.6
KontaktflächenmaterialNi/Au
Material DrahtisolierungPE
Normen/SpezifikationenIEC 61076-2-101
Prüfspannung Kern/Abschirmung2000.00 V (50 Hz, 1 min.)
Maximaler Leiterwiderstand≤ 120 Ω/km
Einführ-/Entfernungszyklen≥ 100
Werkstoff für SchraubverbindungBrass, nickel-plated
Drahtdurchmesser inkl. Isolierungapprox. 1.55 mm
Umgebungstemperatur (Betrieb)-40 °C ... 70 °C (cable, fixed installation)
Leiterstruktur-Signalleitung7x 0.25 mm
Umgebungstemperatur (Installation)-20 °C ... 60 °C
Brennbarkeitsklasse gemäß UL 94V0
Übertragungseigenschaften (Kategorie)CAT5
Minimaler Biegeradius, feste Installation3 x D
Kleinster Biegeradius, feste Installation20 mm
Minimaler Biegeradius, flexible Installation7 x D
Kleinster Biegeradius, bewegliche Installation46 mm

Produktbeschreibung

Conect. plug. to be apar. poster wall, PROFINET CAT5 (100 MBit/s) CAT5 (100 MBit/s), 4-pole, halogen-free PVC, green RAL 6018, shielded, Built-in mounting female, straight, M12-SPEEDCON, encoding: D,
Hauptmerkmale
  • Qualität in Industrieklasse
  • RoHS-konform
  • CE-zertifiziert
  • 1‑Jahresgarantie

Produktdokumente

Datenblatt

Technische Spezifikationen und Leistungsdaten

Benutzerhandbuch

Installations- und Betriebsanleitung

Top