Servicezeiten: Montag bis Freitag 9:00-18:00
VAL-SEC-T2-3C-440-FM - VAL-SEC-T2-3C-440-FM 2909968 PHOENIX CONTACT Type 2 surge arrester
Vorrätig Top‑Produkt

VAL-SEC-T2-3C-440-FM

VAL-SEC-T2-3C-440-FM 2909968 PHOENIX CONTACT Type 2 surge arrester

$0.00USD
3242 auf Lager
Wichtige Spezifikationen
:T2
Notiz:Usable in all low-voltage systems between L-N or L-PEN.Only usable in IT Systems between L-PE, if the exposed-conductive-parts (bodies) of the equipment of the low-voltage installation is connected to the earthing arrangement of the transformer substation. (interconnected earthing arrangement of the HV-transformer substation with the bodies of the LV-installation. RE= RAaccordance to IEC 60364-4-442 / VDE 0100-442 Fig. 44D / Example a)
Typ:DIN rail module, two-section, divisible
Tiefe:74.5 mm (incl. DIN rail 7.5 mm)
Lieferanteninformation
Produkte: 0
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support

Technische Spezifikationen

ParameterWert
T2
NotizUsable in all low-voltage systems between L-N or L-PEN.Only usable in IT Systems between L-PE, if the exposed-conductive-parts (bodies) of the equipment of the low-voltage installation is connected to the earthing arrangement of the transformer substation. (interconnected earthing arrangement of the HV-transformer substation with the bodies of the LV-installation. RE= RAaccordance to IEC 60364-4-442 / VDE 0100-442 Fig. 44D / Example a)
TypDIN rail module, two-section, divisible
Tiefe74.5 mm (incl. DIN rail 7.5 mm)
Breite37.3 mm
Höhe≤ 2000 m (amsl)
EN-TypT2
ProduktartSurge arrester
SchraubengewindeM5
MontageartDIN rail: 35 mm
MaterialgruppeI
ProduktfamilieSEC Family
VerbindungsnameRemote fault indicator contact
Artikelüberarbeitung03
Horizontale Neigung2 Div.
GehäusematerialPA 6.6-FR 20 % GF
Verschmutzungsgrad2
Reaktionszeit tA≤ 25 ns
Abstreiflänge16 mm
VerbindungsmethodeScrew connection
Betriebsstrom5 mA AC ... 1 A AC
Betriebsspannung5 V AC ... 250 V AC
Schock (Operation)30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Anzugsmoment4.5 Nm
SchutzmodusL-PEN
Nennspannung UN400/690 V AC (TN-C)
SchaltfunktionChangeover contact
TOV-Verhalten an der UT581 V AC (5 s / withstand mode)
Maßzeichnung
Handlungsrichtung3L-N/PE
IsoliermaterialPA6.6-FR 20% GF
Anzahl der Positionen3
Farbe (Basiselement)gray (RAL 7042)
SchutzgradIP20
Nennfrequenz fN50 Hz (60 Hz)
ÜberspannungskategorieIII
CTI-Wert des Materials600
Bemessungslaststrom IL40 A (Biconnect M4 fork-type cable lug 6​ mm²)
Restspannung Ures≤ 1.9 kV (at In)
Vibration (Betrieb)5g (10 ... 500 Hz / 2.5 h / X, Y, Z)
Farbe (Stecker)light gray (RAL 7035)
IEC-StromversorgungssystemTN-C
IEC-PrüfklassifizierungII
Normen/SpezifikationenIEC 61643-11
Leiterquerschnitt AWG12 ... 4
Spannungsschutzstufe erhöht≤ 1.9 kV
Standby-Stromverbrauch PC≤ 540 mVA
Leiterquerschnitt starr2.5 mm² ... 25 mm²
Maximale Dauerspannung UC440 V AC
Überspannungsschutz-FehlermeldungOptical, remote indicator contact
Umgebungstemperatur (Betrieb)-40 °C ... 80 °C
Leiterquerschnitt flexibel2.5 mm² ... 16 mm²
Zulässige Luftfeuchtigkeit (Betrieb)5 % ... 95 %
Kurzschlussstrombelastbarkeit ISCCR25 kA (for a backup fuse of up to 315 A gG)
Maximale Backup-Sicherung mit Abzweigverdrahtung315 A (gG)
Brennbarkeitsklasse gemäß UL 94V-0
Nennentladestrom In(8/20) µs20 kA
Umgebungstemperatur (Lagerung/Transport)-40 °C ... 80 °C
Maximaler Entladestrom Imax(8/20) µs40 kA
Maximale Backup-Sicherung mit V-förmiger Durchgangsverdrahtung40 A (gG / Biconnect M4 fork-type cable lug, 6​ mm²)

Produktbeschreibung

Plug-in surge arrester according to type 2/class II, for three-phase power supply networks with PE and N routing combined in one conductor (4-conductor system: L1, L2, L3, PEN), with remote indication
Hauptmerkmale
  • Qualität in Industrieklasse
  • RoHS-konform
  • CE-zertifiziert
  • 1‑Jahresgarantie

Produktdokumente

Datenblatt

Technische Spezifikationen und Leistungsdaten

Benutzerhandbuch

Installations- und Betriebsanleitung

Top