


| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Gewicht | Net weight: 110 g approx., Gross weight: 180 g approx. |
| Details | Spot type |
| Produkt | Thin-type Ionizer |
| Material | Enclosure: ABS (Nickel plated), Nozzle mount, Screw mount, Nozzle: Stainless steel. Discharge needle: Tungsten |
| Zubehör | Connector attached cable: 1 pc. (length 0.5 m1.640 ft), End connector (9-pin): 1 pc., Lead wire for connecting F.G.: 1 pc. |
| Ionengleichgewicht | plus or minus10 V or less(Note) A typical sample applied with a supply voltage of 24 V, a distance of 100 mm3.937 infrom the front surface of the air flow outlet and a pressure of 0.25 MPa. (Measured on a sample left in the atmosphere at a relative humidity of 65 % RH or less for 24 hours or more.) |
| Teilenummer | ER-VW |
| Produktname | Thin-type Ionizer ER-VW |
| E/A-Anschluss | For power & input / output: 8-pin connector, For connection: 9-pin connector |
| Produktnummer | ER-VW |
| Versorgungsspannung | 24 V DC plus or minus 10 % |
| Umgebungsfeuchtigkeit | 35 to 65 % RH (No dew condensation allowed), Storage: 35 to 65 % RH |
| Geeignete Flüssigkeit | Air (dried clean air)(Note) Dry clean air is air that has been processed through an air dryer (freezing point around –20 ℃ –4 ℉) and an air filter (mesh size around 0.01 microm0.0004 mil). |
| Entladungsmethode | High frequency AC method |
| Ozonbildung | 0.05 ppm or less(Note) A typical sample applied with a supply voltage of 24 V, a distance of 300 mm11.811 infrom the front surface of the air flow outlet and a pressure of 0.25 MPa. |
| Verbindbare Einheiten | Maximum number of connectable units: 5 (Including this unit) |
| Zugeführter Luftstrom | 60 liter/min. (ANR) or less |
| Luftdruckbereich | 0.05 to 0.5 MPa |
| Gehäuseerdung | Capacitor earth |
| Umgebungstemperatur | 0 to +55 ℃+32 to +131 ℉(No dew condensation allowed), Storage: –10 to +65 ℃+14 to +149 ℉ |
| Zeit für die Ladungsentnahme | 1 sec. or less (plus or minus1,000 V to plus or minus100 V)(Note) A typical sample applied with a supply voltage of 24 V, a distance of 100 mm3.937 infrom the front surface of the air flow outlet and a pressure of 0.25 MPa. (Measured on a sample left in the atmosphere at a relative humidity of 65 % RH or less for 24 hours or more.) |
| Aktueller Verbrauch | 120 mA or less |
| Reset-Eingang (RESET) | In the state that operation is stopped due to an error detection, open 0 V of the power supply from short-circuit state to cancel ERROR |
| Ausgabe: Ausgabeoperation | Check output (CHECK): ON when the discharge needle is dirty or worn, OFF when operation is normalError output (ERROR): OFF when abnormal discharge is detected, ON when operation is normalDischarge output (DSC) (Note): ON when discharging, OFF when discharge halts(Note) ‘‘DSC’’ is an abbreviated name of ‘‘DISCHARGE’’. |
| Entladeausgangsspannung | 2,000 V approx. |
| Indikatoren:Prüfen (CHECK) | Orange LED (lights up when the discharge needle is dirty or worn, etc.) |
| Indikatoren: Fehler (FEHLER) | Red LED (lights up when abnormal discharge is detected) |
| Indikatoren: Leistung (LEISTUNG) | Green LED (lights up when the power is ON) |
| Indikatoren: Entladung (DSC) | Green LED (lights up when discharging)(Note) ‘‘DSC’’ is an abbreviated name of ‘‘DISCHARGE’’. |
| Entladestopp-Eingang (DSC AUS) | Short-circuit to 0 V: Discharge halt, Open: Discharge allowed (operation start)(Note:"DSC" is an abbreviated name of "DISCHARGE".) |
| Indikatoren: Luftüberwachung (AIR) | Orange LED (lights up when no air is being supplied)(Note) Discharge halts when lights up. |
| Ausgang: Kurzschlussschutz | Incorporated |
| Ausgabe [Prüfen (CHECK) Fehler (ERROR) Entladen (DSC)] | NPN open-collector transistor• Maximum sink current: 50 mA• Applied voltage: 30 V DC or less (between output and 0 V)• Residual voltage: 1 V or less (at 50 mA sink current)(Note:"DSC" is an abbreviated name of "DISCHARGE".) |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung