Servicezeiten: Montag bis Freitag 9:00-18:00
UST4A1J1V - UST4A1J1V ST4-A1-J1V PANASONIC Safety, Thu-beam sensor, 15m, emission adjuster, cable 1m
Vorrätig Top‑Produkt

UST4A1J1V

UST4A1J1V ST4-A1-J1V PANASONIC Safety, Thu-beam sensor, 15m, emission adjuster, cable 1m

$0.00USD
4335 auf Lager
Wichtige Spezifikationen
Artikel:Specifications
Kabel:Shielded cable with connector, 1 m3.281 ftlong
Details:Sensor head
Produkt:Compact Type 4 Safety Beam Sensor
Lieferanteninformation
PANASONIC
PANASONIC
Produkte: 4316
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support

Technische Spezifikationen

ParameterWert
ArtikelSpecifications
KabelShielded cable with connector, 1 m3.281 ftlong
DetailsSensor head
ProduktCompact Type 4 Safety Beam Sensor
MaterialEnclosure: PBT (Polybutylene terephthalate)Lens: AcrylicIndicator cover: Acrylic
TeilenummerST4-A1-J1V
ProduktnameCompact Type 4 Safety Beam Sensor ST4
NetzspannungSupplied from controller
ProduktnummerST4-A1-J1V
Erfassungsobjektφ9 mmφ0.354 inor more opaque object
KabelverlängerungExtention up to total 50 m164.042 ftis possible for both emitter and receiver with exclusive cable.
Betriebsbereich0.1 to 15 m0.328 to 49.213 ft(Note:The operating range is the possible setting distance between the emitter and the receiver. It can detect sensing object of less than 0.1 m 0.328 ft away.)
EmitterelementInfrared LED (Peak emission wavelength: 870 nm0.034 mil)
UmgebungsbeleuchtungsstärkeIncandescent lamp: 3,500 Lx or less at the light-receiving face
Aktueller VerbrauchEmitter: 11 mA or lessReceiver: 9 mA or less
Anwendbare StandardsIEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1:2015 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 3 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 3 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)(Note) Complies with those standards only when the sensor head is used in combination with the controller ST4-C11 / ST4-C12EX.
StrahlemissionsanzeigerGreen LED (lights up during beam emission, lights off during emission halt)
Effektiver Öffnungswinkelplus or minus 2.5degrees or less for operating range exceeding 3 m 9.843 ft (required by IEC 61496-2 / UL 61496-2)
StrahlunterbrechungsanzeigeRed LED (lights up when the beam is interrupted or lock out, lights off during reception)(Note) Shows light interruption information between the emitter and the receiver with the same address. It does not show OSSD output.
Indikator für stabilen einfallenden StrahlGreen LED (lights up under stable light received condition, lights off under unstable light received condition)
Einhaltung der CE-KennzeichnungsrichtlinieMachinery Directive, EMC Directive, RoHS Directive
Gewicht (Gesamtgewicht von Sender und Empfänger)Net weight: 100 g approx.Gross weight: 140 g approx.
Umweltbeständigkeit: Umgebungsfeuchtigkeit30 to 85 % RH, Storage: 30 to 95 % RH
Umweltbeständigkeit: Stoßfestigkeit300 m/s2acceleration in X, Y and Z directions three times each
Umweltbeständigkeit: Umgebungstemperatur-10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: -25 to +70 ℃-13 to +158℉
Umweltbeständigkeit: SchutzgradIP67 (IEC)
Umweltbeständigkeit: Vibrationsbeständigkeit10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 90 m/s2 in X, Y and Z directions for two hours each<
Umweltbeständigkeit: Isolationswiderstand20 MOhm or more with 500V DC megger between all supply terminals connected together and enclosure
Umweltbeständigkeit: Spannungsfestigkeit1,000 V AC for one min. between all supply terminals connected together and enclosure

Produktbeschreibung

Category 4 safety barrier sensor head, independent beams, IP67, 0.1 to 15m, built-in 1m cable, sensitivity adjustment
Hauptmerkmale
  • Qualität in Industrieklasse
  • RoHS-konform
  • CE-zertifiziert
  • 1‑Jahresgarantie

Produktdokumente

Datenblatt

Technische Spezifikationen und Leistungsdaten

Benutzerhandbuch

Installations- und Betriebsanleitung

Top