Vorrätig Top‑Produkt
UNA111PN-T
UNA111PN-T NA111PN NA1-11-PN PANASONIC Cross-beam area sensor, 1 m sensing range 12-24V DC, PNP
$0.00USD
3988 auf Lager
Wichtige Spezifikationen
Artikel:Specifications
Kabel:0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong
Ausgabe:PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Gewicht:Net weight: Emitter 80 g approx., Receiver 85 g approxGross Weight: 210 g approx.
Lieferanteninformation
PANASONIC
Produkte: 4316
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Kabel | 0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| Ausgabe | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Gewicht | Net weight: Emitter 80 g approx., Receiver 85 g approxGross Weight: 210 g approx. |
| Details | PNP output |
| Produkt | Small / Slim Object Detection Area Sensor |
| Material | Enclosure: Heat-resistant ABSLens: AcrylicIndicator cover: Acrylic |
| Schutz | IP62 (IEC) |
| Teilenummer | NA1-11-PN |
| Produktname | Small / Slim Object Detection Area Sensor NA1-11 |
| Elementabstand | 10 mm0.394 in |
| Ansprechzeit | In Dark state: 5 ms or lessIn Light state: 10 ms or less |
| Erfassungsbereich | 0.17 to 1 m0.558 to 3.281 ft(Note：The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.) |
| Produktnummer | NA1-11-PN |
| Höhenerfassung | 100 mm3.937 in |
| Erfassungsobjekt | ø13.5 mmø0.531 inor more opaque object(Note：Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.) |
| Versorgungsspannung | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Kabelverlängerung | Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. |
| Umgebungsfeuchtigkeit | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Emitterelement | Infrared LED (Peak emission wavelength: 880nm0.035mil, cross-beam scanning system) |
| Verschmutzungsgrad | 3 (Industrial environment) |
| Stoßfestigkeit | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Indikatoren:Emitter | Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch) |
| Umgebungsbeleuchtungsstärke | Incandescent light: 3,000 lx or less at the light-receiving face |
| Umgebungstemperatur | -10 to 55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Aktueller Verbrauch | Emitter: 80 mA or lessReceiver: 100 mA or less |
| Indikatoren: Empfänger | Operation indicator: Orange LED (lights up when the output is ON)Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch) |
| Vibrationsfestigkeit | 10 to 150 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Isolationswiderstand | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Ausgabe: Ausgabeoperation | ON or OFF when beam channel is interrupted, selectable by operation mode switch |
| Spannungsfestigkeit | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Ausgabe: Nutzungskategorie | DC-12 or DC-13 |
| Einhaltung der CE-Kennzeichnungsrichtlinie | EMC Directive, RoHS Directive |
| Ausgang: Kurzschlussschutz | Incorporated |
| Anzahl der sendenden/empfangenden Elemente | 11 Nos. each on the emitter and the receiver, respectively |
Produktbeschreibung
CROSSBEAM AREA SENSOR, detection range 1 meter, 12-24 VDC, PNP
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
