

| Parameter | Wert |
|---|---|
| Tiefe | 65 mm |
| Breite | 240 mm |
| Höhe | ≤ 2000 m |
| Allgemein | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| EMV-Hinweis | EMC: class A product, see manufacturer's declaration in the download area |
| Isolierung | Basic insulation |
| Produktart | Relay Module |
| Schraubengewinde | UNC 4-40 |
| Montageart | DIN rail mounting |
| Verschmutzungsgrad | 2 |
| Verbindungsmethode | D-SUB socket strip |
| Montageposition | any |
| Anzahl der Positionen | 25 |
| Bemessungsstoßspannung | 2.5 kV (50 Hz, 1 min.) (The specified data only applies in connection with the optocouplers listed under “required accessories”) |
| Schutzgrad | IP00 |
| Überspannungskategorie | III |
| Montageanleitung | in rows with zero spacing |
| Normen/Vorschriften | DIN EN 50178: 1998-04 |
| Statusanzeige vorhanden | No |
| Nenneingangsspannung UN | 24 V DC |
| Maximale Schaltspannung | 24 V DC |
| Leiterquerschnitt AWG | 24 ... 12 |
| Begrenzung des Dauerstroms | 1 A (per channel (2-conductor, floating)) |
| Typischer Eingangsstrom an UN | 1 A (per channel) |
| Leiterquerschnitt starr | 0.2 mm² ... 4 mm² |
| Umgebungstemperatur (Betrieb) | -20 °C ... 50 °C |
| Leiterquerschnitt flexibel | 0.2 mm² ... 2.5 mm² |
| Anschluss gemäß Standard | DIN 41652/IEC 60807-2 |
| Eingangsspannungsbereich in Bezug auf UN | 0.9 ... 1.1 |
| Schutzgrad (Installationsort) | ≥ IP54 (Installation location) |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung