

| Parameter | Wert |
|---|---|
| Tiefe | 146 mm |
| Breite | 61 mm |
| Höhe | ≤ 2000 m |
| Isolierung | Reinforced insulation |
| Produktart | Relay Module |
| Montageart | DIN rail mounting |
| Mit Komponenten | yes |
| Verschmutzungsgrad | 2 |
| Verbindungsmethode | IDC/FLK pin strip |
| Montageposition | any |
| Hinweise zum Betrieb | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Anzahl der Positionen | 14 |
| Bemessungsstoßspannung | 6 kV (1.2/50 μs) |
| Schutzgrad | IP00 |
| Überspannungskategorie | III |
| Anzahl der Verbindungen | 1 |
| Normen/Vorschriften | DIN EN 50178: 1998-04 |
| Kontaktschaltart | Single contact, 1 changeover contact |
| Nenneingangsspannung UN | 24 V DC (±10 %) |
| Bemessungsisolationsspannung | 260 V |
| Maximale Schaltspannung | 150 V AC/DC (Maximum switching voltage of 230 V AC: the maximum switching voltage of 230 V is only permitted if the same fuse circuit is used. The outputs are not suitable for switching different outer conductors.) |
| Leiterquerschnitt AWG | 24 ... 12 |
| Begrenzung des Dauerstroms | 4 A |
| Typischer Eingangsstrom an UN | 200 mA (200 mA supply / ≤ 20 mA input current per signal) |
| Leiterquerschnitt starr | 0.2 mm² ... 2.5 mm² |
| Umgebungstemperatur (Betrieb) | -20 °C ... 50 °C |
| Leiterquerschnitt flexibel | 0.2 mm² ... 2.5 mm² |
| Anschluss gemäß Standard | IEC 60603-13 |
| Schutzgrad (Installationsort) | ≥ IP54 (Installation location) |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung