

| Parameter | Wert |
|---|---|
| 6 kV (Safe isolation and reinforced insulation between input circuit and output contact paths) | |
| Farbe | green (RAL 6021) |
| Tiefe | 62 mm |
| Tonhöhe | 2.54 mm |
| Breite | 285.5 mm |
| Höhe | 112 mm |
| Produktart | Interface module |
| Schraubengewinde | M3 |
| Montagehinweis | in rows with zero spacing |
| Montageart | DIN rail mounting |
| Betriebsart | 100% operating factor |
| Anzahl der Kanäle | 32 |
| Mit Komponenten | yes |
| Artikelüberarbeitung | 06 |
| Kontaktmaterial | AgNi |
| Verschmutzungsgrad | 2 |
| Abstreiflänge | 8 mm |
| Verbindungsmethode | IDC/FLK pin strip |
| Montageposition | any |
| Geeignete I/O-Karte | QY82P |
| Hinweise zum Betrieb | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Schutzschaltung | Free-wheeling diode (integrated in relay) |
| Eingangsspannungsbereich | 21.6 V DC ... 26.4 V DC |
| Anzahl der Positionen | 50 |
| Bemessungsstoßspannung | 4 kV (Basic insulation between output contact current paths) |
| Schutzgrad | IP00 |
| Überspannungskategorie | III |
| Typische Veröffentlichungszeit | 6 ms |
| Anzahl der Verbindungen | 1 |
| Normen/Vorschriften | DIN EN 50178 |
| Typische Reaktionszeit | 9 ms |
| Kontaktschaltart | 1 changeover contact |
| Mindestschaltstrom | 10 mA |
| Statusanzeige vorhanden | Yes |
| Statusanzeige/Kanal | Yellow LED (integrated in relay) |
| Art des Schaltkontakts | Single contact |
| Mechanische Lebensdauer | 5x 106cycles |
| Nenneingangsspannung UN | 24 V DC |
| Bemessungsisolationsspannung | 260 V AC |
| Maximale Schaltspannung | 250 V AC/DC |
| Minimale Schaltspannung | 12 V AC/DC |
| Anzeige der Betriebsspannung | Green LED |
| Leiterquerschnitt AWG | 24 ... 12 |
| Begrenzung des Dauerstroms | 5 A |
| Typischer Eingangsstrom an UN | 18 mA |
| Leiterquerschnitt starr | 0.2 mm² ... 4 mm² |
| Umgebungstemperatur (Betrieb) | -20 °C ... 50 °C |
| Leiterquerschnitt flexibel | 0.2 mm² ... 2.5 mm² |
| Abschaltvermögen (ohmsche Last) max. | 120 W (24 V DC) |
| Eingangsspannungsbereich in Bezug auf UN | 0.9 ... 1.1 (observe derating) |
| Umgebungstemperatur (Lagerung/Transport) | -20 °C ... 70 °C |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung