Vorrätig Top‑Produkt
UFX501P
UFX501P FX-501P PANASONIC Fiber amplifier, PNP, 1 digital output, double display, connector type
$0.00USD
3186 auf Lager
Wichtige Spezifikationen
Artikel:Specifications
Kabel:-
Ausgabe:PNP open-collector transistor- Maximum source current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (Note 2) (at maximum source current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)
Gewicht:Net weight: 15 g approx.Gross weight: 70 g approx.
Lieferanteninformation
PANASONIC
Produkte: 4316
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Kabel | - |
| Ausgabe | PNP open-collector transistor- Maximum source current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (Note 2) (at maximum source current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| Gewicht | Net weight: 15 g approx.Gross weight: 70 g approx. |
| Details | Standard type |
| Produkt | Digital Fiber Sensor |
| Material | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| Zubehör | FX-MB1 (Amplifier protection seal): 1 set |
| Schutz | IP40 (IEC) |
| Teilenummer | FX-501P |
| Produktname | Digital Fiber Sensor FX-500 Ver.2 |
| Ansprechzeit | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| Externer Eingang | - |
| Produktnummer | FX-501P |
| Versorgungsspannung | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| Timerfunktion | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective |
| Kabelverlängerung | - |
| Verschiedene Einstellungen | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| Stromverbrauch | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage) |
| Umgebungstemperatur | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 16 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| Empfindlichkeitseinstellung | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| Ausgabe: Ausgabepunkte | 1 point |
| Ausgabe: Ausgabeoperation | Switchable either Light-ON or Dark-ON by L/D mode |
| Timerfunktion: Timerperiode | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| Emitter (moduliert) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Einhaltung der CE-Kennzeichnungsrichtlinie | EMC Directive, RoHS Directive |
| Ausgang: Kurzschlussschutz | Incorporated |
| Funktion zur Einstellung der Emissionsmenge | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| Störungsverhinderungsfunktion | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| Mögliche externe Eingangsfunktion | - |
| Anzeigebereich der einfallenden Lichtintensität | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| Externer Eingang (umschaltbar mit Ausgang 2) | - |
Produktbeschreibung
FX-500 Amplifier F. Optical, PNP output, dual display, high sensitivity and detection distance, ultra-fast.
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
