Vorrätig Top‑Produkt
UERX001
UERX001 ER-X001 PANASONIC Wide-area, high speed ionizer-head, spot type, charge removal time 1sec, ion balan..
$0.00USD
3518 auf Lager
Wichtige Spezifikationen
Artikel:Specifications
Gewicht:Net weight : 370 g approx.
Details:Head
Produkt:Pulse AC Method Area Ionizer
Lieferanteninformation
PANASONIC
Produkte: 4316
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Gewicht | Net weight : 370 g approx. |
| Details | Head |
| Produkt | Pulse AC Method Area Ionizer |
| Material | Main unit enclosure: Stainless steal (SUS)Head mounting bracket: Stainless steal (SUS)Discharge needle: PFA, Tungsten |
| Zubehör | Head mounting bracket (installed at the time of factory shipment) |
| Ionengleichgewicht | ±30 V or less(Note 1：Typical value in condition of discharge distance 100 mm3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)(Note 2： Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.) |
| Teilenummer | ER-X001 |
| Produktname | Pulse AC Method Area Ionizer ER-X |
| Produktnummer | ER-X001 |
| Umgebungsfeuchtigkeit | 35 to 65 % RH, Storage: 35 to 85 % RH |
| Geeignete Flüssigkeit | Air (dried clean air)(Note：The dried clean air is the air dried (dew point: equivalent of -20 ℃-4 ℉) and filtered (mesh-size: equivalent of 0.01 μm) .) |
| Entladungsmethode | Pulse AC method(Note：The discharge frequencies of 50 Hz, 20 Hz are accepted.) |
| Ozonbildung | 0.01 ppm or less(Note：Typical value in condition of discharge distance 50 mm1.969 in, center of the product, discharge wavelength 50 Hz and no air supply.) |
| Stoßfestigkeit | 100 m/s2acceleration (10 G approx.), in X, Y and Z directions three times each |
| Gehäuseerdung | Floating |
| Betriebshöhe | 2,000 m6561.68 ftor less(Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.) |
| Umgebungstemperatur | 0 to +40 ℃+32 to +104 ℉(No dew condensation), Storage: -10 to +65℃+14 to +149℉ |
| Zeit für die Ladungsentnahme | 0.3 sec. or less (Note 1), 0.5 sec. or less (Note 2)(Note 1： Typical value in condition of discharge distance 50 mm1.969 in, center of the product, discharge wavelength 50 Hz and air supply 60 ℓ / min. (0.3 MPa)) .(Note 2： Typical value in condition of discharge distance 50 mm1.969 in, center of the product, discharge wavelength 50 Hz and no air supply.) |
| Entladungsfrequenz | 50 Hz / 20 Hz |
| Maximaler Luftdruck | 0.5 MPa |
| Vibrationsfestigkeit | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Anwendbare Vorschriften | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), TÜV SÜD certification (USA, Canada) |
| Entladeausgangsspannung | ±7,000 V approx. |
| Länge des Hochspannungskabels | 1.2 m3.937 ft |
| Effektive Ladungsentfernungsbreite | 50 mm1.969 inapprox. |
Produktbeschreibung
ER-X ionizer, wide area, high speed, spot spot, charge removal time < 1sec, ion balance max. ± 30V, voltage discharge output approx. 7kV
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
