Vorrätig Top‑Produkt
UDPH103
UDPH103 DPH-103 PANASONIC Pressure sensor head DPH-100, -1 to 0bar, 1 to 5V, R1/8 male thread and M5 female ..
$0.00USD
4763 auf Lager
Wichtige Spezifikationen
Artikel:Specifications
Kabel:0.2 mm24-core oil resistant cabtyre cable (Models with "-R" affixed to the Model No. have bending-resistant, oil-resistant cabtyre cable)
Bemerkung:Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +25 ℃+77 ℉.The sensor head can be used independently.
Details:Sensor head
Lieferanteninformation
PANASONIC
Produkte: 4316
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Kabel | 0.2 mm24-core oil resistant cabtyre cable (Models with "-R" affixed to the Model No. have bending-resistant, oil-resistant cabtyre cable) |
| Bemerkung | Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +25 ℃+77 ℉.The sensor head can be used independently. |
| Details | Sensor head |
| Produkt | Head-separated Dual Display Digital Pressure Sensor [For gas] |
| Material | Front case : PBT, Rear case : PBT (glass fiber reinforced), Pressure port : Stainless steel (SUS303), O-ring : NBRPressure element : Silicon diaphragm, PPS |
| Schutz | IP40 (IEC) |
| Zubehör | Connector (e-CON) : 1 pc. |
| Teilenummer | DPH-103 |
| Produktname | Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100 |
| Druckanschluss | R1/8male thread + M5 female thread. |
| Produktnummer | DPH-103 |
| Versorgungsspannung | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Kabelverlängerung | Extension up to total 10 m32.808 ftis possible with 0.2 mm2, or more, cable. |
| Umgebungsfeuchtigkeit | 35 to 85 % RH, Storage : 35 to 85 % RH |
| Geeignete Flüssigkeit | Air, non-corrosive gas |
| Stoßfestigkeit | 1,000 m/s2acceleration (100 G approx.) in X, Y and Z directions for three times each |
| Druckart | Gauge pressure |
| Verbindungsmethode | Connector |
| Umgebungstemperatur | 0 to +50 ℃+32 to +122 ℉(No dew condensation allowed), Storage : -10 to +60 ℃+14 to +140 ℉ |
| Aktueller Verbrauch | 15 mA or less |
| Gewicht: Nettogewicht | Head 10 g approx. / Cable 40 g approx. |
| Nenndruckbereich | 0 to -101.0 kPa |
| Vibrationsfestigkeit | 10 to 500 Hz frequency, amplitude 3 mm0.118 inor maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each |
| Analoger Spannungsausgang | Output voltage : 1 to 5 V (over rated pressure range)Zero point : within 1 V ± 2.5 % F.S. (vacuum / positive pressure type)within 3 V ± 3 % F.S. (compound pressure type)Span : within 4 V ± 3.5 % F.S.Linearity : within ±0.5 % F.S.Output impedance : 1 kΩ approx. |
| Isolationswiderstand | 50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Gewicht: Bruttogewicht | 80 g approx. |
| Spannungsfestigkeit | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Druckbeständigkeit | 500 kPa |
| Temperaturcharakteristik | Over ambient temperature range 0 to +50 ℃+32 to +122 ℉: within ±2 % F.S. of detected pressure at +25 ℃+77 ℉ |
| Einhaltung der CE-Kennzeichnungsrichtlinie | EMC Directive, RoHS Directive |
Produktbeschreibung
DPH100 sensor head, vacuum pressure 0 to -101.0 KPa, thread R1/8 male + M5 female, analog output 1-5 VDC, cable 2 m.
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
