Vorrätig Top‑Produkt
UDP102ZL3MPC
UDP102ZL3MPC DP-102ZL3-M-P-C PANASONIC Pressure sensor, -1 to 10bar, IO Link, pressure connector short M5 fe..
$0.00USD
3278 auf Lager
Wichtige Spezifikationen
Artikel:Specifications
Bemerkung:(Note:)measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20℃ +68℉.
Gewicht:Net weight: 30 g approx., Gross weight: 95 g approx.
Details:M12 connector type
Lieferanteninformation
PANASONIC
Produkte: 4316
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Bemerkung | (Note:)measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20℃ +68℉. |
| Gewicht | Net weight: 30 g approx., Gross weight: 95 g approx. |
| Details | M12 connector type |
| Anzeige | 4 digits + 4 digits 3-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation) |
| Produkt | Dual Display Digital Pressure Sensor [For Gas] |
| Material | Enclosure: PBT (glass fiber reinforced), LCD display: Acrylic, Pressure port: Stainless steel (SUS303) , Mounting threaded part: Brass (nickel plated), Switch part: Silicone rubber |
| Schutz | IP40(IEC） |
| Zubehör | Dedicated M12 connector cable, 0.3 m0.984 ftlong: 1 pc. |
| Teilenummer | DP-102ZL3-M-P-C |
| Kabellänge | Total length up to 20 m65.617 ft(Condition of CE compliance less than 20 m65.617 ft)is possible with 0.3 mm2, or more, cable. |
| Produktname | Dual Display Digital Pressure Sensor [For Gas] DP-100L |
| Druckanschluss | M5 female thread |
| Produktnummer | DP-102ZL3-M-P-C |
| Versorgungsspannung | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Umgebungsfeuchtigkeit | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Geeignete Flüssigkeit | Non-corrosive gas |
| Ausgabeanzeige | Orange LED(Output operation indicator 1: Flashes during IO-Link communication, Lights up when the control output is ON during non-IO-Link communication (synchronized with the output operation indicator 2)Output operation indicator 2: Lights up when the control output is ON) |
| Stoßfestigkeit | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Druckart | Gauge pressure |
| Verbindungsmethode | Connector |
| Stromverbrauch | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage)360 mW or less at FULL (Current consumption 15 mA or less at 24 V supply voltage) |
| Einstelldruckbereich | -0.101 to +1.010MPa |
| Umgebungstemperatur | －10 to +50℃+14 to +122 ℉(No dew condensation or icing allowed), Storage: －10 to +60℃+14 to +140 ℉ |
| Steuerausgang (DO) | PNP open-collector transistor•Maximum source current: 50 mA• Applied voltage: 30 V DC or less (between output and +V)• Residual voltage: 2 V or less (at 50 mA source current) |
| Nenndruckbereich | -0.100 to +1.000 Mpa |
| Vibrationsfestigkeit | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each(when panel or flat attachment is mounted: 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each) |
| Isolationswiderstand | 50 MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure |
| Spannungsfestigkeit | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Druckbeständigkeit | 1.5MPa |
| Temperaturcharakteristik | Within ±1 % F.S.(at +20℃+68℉) |
| Steuerausgang (DO): Hysterese | Minimum 1 digit (variable) |
| Steuerausgang (DO): Wiederholgenauigkeit | ±0.2 % F.S. (within ±2 digits) |
| Steuerausgang (DO): Reaktionszeit | 2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation |
| Anzeige: Anzeigbarer Druckbereich | -0.101 to +1.010MPa |
| Kommunikationsausgang (C/Q): Baudrate | COM3 (230.4 kbps)(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| Steuerausgang (DO): Ausgangsfunktion | N.O./N.C. (selectable by key operation) |
| Kommunikationsausgabe (C/Q): Prozessdaten | 4 byte(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| Einhaltung gesetzlicher Bestimmungen und Zertifizierung | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL/c-UL Certification |
| Steuerausgang (DO): Kurzschlussschutz | Incorporated |
| Kommunikationsausgang (C/Q): Minimale Zykluszeit | 1.0ms(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| Kommunikationsausgang (C/Q): IO-Link-Kommunikation | IO-Link Specification V1.1(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| Steuerausgang (DO): Ausgangsbetrieb, Ausgangsmodi | EASY mode / Hysteresis mode / Window comparator mode |
Produktbeschreibung
DP-100L Series. Digital pressure controller, -1 to 10bar, short M5 female threaded pressure port, M12 0.3m connector, IO Link connection, PNP
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
