


| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Ausgabe | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current) |
| Details | Thru-beam(Long sensing range) |
| Produkt | Compact Photoelectric Sensor |
| Material | Enclosure: PBT (polybutylene terephthalate)Lens: acrylicIndicator cover: acrylic |
| Zubehör | - |
| Hysterese | - |
| Schutz | IP67 (IEC) |
| Teilenummer | CX-412-P-Z |
| Produktname | Compact Photoelectric Sensor CX-400 Ver.2 |
| Ansprechzeit | 1 ms or less |
| Erfassungsbereich | 15 m49.213 ft |
| Produktnummer | CX-412-P-Z |
| Erfassungsobjekt | Ø12 mmØ0.472 inor more opaque object(Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in(using round slit mask) can be detected. |
| Versorgungsspannung | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Betriebsanzeige | Orange LED(lights up when the output is ON)(incorporated on the receiver for thru-beam type) |
| Umgebungsfeuchtigkeit | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Stoßfestigkeit | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Umgebungsbeleuchtungsstärke | Incandescent light: 3,000 lx or less at the light-receiving face |
| Umgebungstemperatur | - 25 to +55℃-13 to +131℃ ℉(No dew condensation or icing allowed ), Storage: -30 to +70℃-22 to +158℃ ℉ |
| Aktueller Verbrauch | Emitter: 20 mA or lessReceiver: 10 mA or less |
| Stabilitätsindikator | Green LED(lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type) |
| Empfindlichkeitsregler | Continuously variable adjuster(incorporated on the receiver for thru-beam type) |
| Vibrationsfestigkeit | 10 to 500 Hz frequency, 1.5 mm0.059 inamplitude (10 G max.) in X, Y and Z directions for two hours each |
| Isolationswiderstand | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Ausgabe: Ausgabeoperation | Switchable either Light-ON or Dark-ON |
| Spannungsfestigkeit | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Emitter (moduliert) | Infrared LED |
| Einhaltung der CE-Kennzeichnungsrichtlinie | EMC Directive, RoHS Directive |
| Ausgang: Kurzschlussschutz | Incorporated |
| Automatische Störungsunterdrückungsfunktion | - |
| Wiederholgenauigkeit (senkrecht zur Messachse) | 0.5 mm0.020 inor less |
| Emissionselement (moduliert): Emissionswellenlänge des Maximums | 870 nm0.034 mil |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung