Vorrätig Top‑Produkt
UCX411P
UCX411P CX411P CX-411-P PANASONIC Thru-beam, 10m, PNP, cable 2m
$0.00USD
3108 auf Lager
Wichtige Spezifikationen
Artikel:Specifications
Kabel:0.2 mm23-core (emitter: 2-core) cabtyre cable, 2 m6.562 ftlong
Ausgabe:PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Gewicht:Net weight: 95 g approx.Gross weight: 100 g approx.
Lieferanteninformation
PANASONIC
Produkte: 4316
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Kabel | 0.2 mm23-core (emitter: 2-core) cabtyre cable, 2 m6.562 ftlong |
| Ausgabe | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current) |
| Gewicht | Net weight: 95 g approx.Gross weight: 100 g approx. |
| Details | Thru-beam |
| Produkt | Compact Photoelectric Sensor |
| Material | Enclosure: PBT (polybutylene terephthalate)Lens: acrylicIndicator cover: acrylic |
| Zubehör | - |
| Hysterese | - |
| Schutz | IP67 (IEC) |
| Teilenummer | CX-411-P |
| Produktname | Compact Photoelectric Sensor CX-400 Ver.2 |
| Ansprechzeit | 1 ms or less |
| Erfassungsbereich | 10 m32.808 ft |
| Produktnummer | CX-411-P |
| Erfassungsobjekt | Ø12 mmØ0.472 inor more opaque object(Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in(using round slit mask) can be detected. |
| Versorgungsspannung | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Kabelverlängerung | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable (both emitter and receiver). |
| Betriebsanzeige | Orange LED(lights up when the output is ON)(incorporated on the receiver for thru-beam type) |
| Umgebungsfeuchtigkeit | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Stoßfestigkeit | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Umgebungsbeleuchtungsstärke | Incandescent light: 3,000 lx or less at the light-receiving face |
| Umgebungstemperatur | - 25 to +55℃-13 to +131℃ ℉(No dew condensation or icing allowed ), Storage: -30 to +70℃-22 to +158℃ ℉ |
| Aktueller Verbrauch | Emitter: 15 mA or lessReceiver: 10 mA or less |
| Stabilitätsindikator | Green LED(lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type) |
| Empfindlichkeitsregler | Continuously variable adjuster(incorporated on the receiver for thru-beam type) |
| Vibrationsfestigkeit | 10 to 500 Hz frequency, 1.5 mm0.059 inamplitude (10 G max.) in X, Y and Z directions for two hours each |
| Isolationswiderstand | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Ausgabe: Ausgabeoperation | Switchable either Light-ON or Dark-ON |
| Spannungsfestigkeit | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Emitter (moduliert) | Red LED |
| Einhaltung der CE-Kennzeichnungsrichtlinie | EMC Directive, RoHS Directive |
| Ausgang: Kurzschlussschutz | Incorporated |
| Automatische Störungsunterdrückungsfunktion | Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m16.404 ft) |
| Wiederholgenauigkeit (senkrecht zur Messachse) | 0.5 mm0.020 inor less |
| Emissionselement (moduliert): Emissionswellenlänge des Maximums | 680 nm0.027 mil |
Produktbeschreibung
Compact photoelectric sensor, 10 m barrier, PNP, 2m cable
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
