

| Parameter | Wert |
|---|---|
| 184 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
| LTE | CAT4 |
| MTTF | 383 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| Tiefe | 127 mm |
| Eingang | ± 2 kV (Test Level 3) |
| Breite | 45 mm |
| Höhe | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
| Signal | Ethernet |
| Antenne | 50 Ω impedance SMA antenna socket |
| Stromspannung | 10 V |
| Kommentare | Criterion B |
| EMV-Hinweis | EMC: class A product, see manufacturer's declaration in the download area |
| Datenrate | ≤ 150 Mbps (LTE, DL) |
| Netzanschluss | Cellular communication |
| Management | Web-based management, SNMP |
| Webserver | yes |
| Anwendung | Ethernet |
| Zertifikat | CE-compliant |
| Kriterium A | Normal operating behavior within the specified limits. |
| Kriterium B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Ausgabename | Digital output |
| Produktart | Cellular router |
| Montageart | DIN rail mounting |
| SIM-Schnittstelle | 1.8 volt, 3 volt |
| Identifikation | ISA-S71.04-1985 G3 Harsh Group A |
| Störfestigkeit | EN 61000-6-2 |
| Länderunterstützung | Europe |
| Feldstärke | 10 V/m |
| Frequenzbereich | 2600 MHz (LTE B38) |
| Anzahl der Kanäle | 2 |
| Artikelüberarbeitung | 08 |
| Entladung in der Luft | ± 8 kV (Test Level 3) |
| Anzahl der Eingänge | 2 |
| Abstreiflänge | 9.00 mm |
| Verbindungsmethode | Push-in spring connection |
| Kontaktentladung | ± 6 kV (Test Level 3) |
| Anzahl der Ausgänge | 1 |
| Material (Gehäuse) | Plastic |
| Hilfsprotokolle | ARP, DHCP, PING (ICMP), SNMP V1/V2, SMTP(S), NTP, SSL/TLS, STARTTLS |
| Maßzeichnung | |
| Hinweis zur Anwendung | Only for industrial use |
| Unterstützte Protokolle | TCP/IP, UDP/IP, FTP, HTTP(S) |
| Übertragungslänge | 100 m (shielded twisted pair) |
| Schutzgrad | IP20 |
| Elektrische Trennung | VCC // LTE // Ethernet // PE |
| Versorgungsspannungsbereich | 10 V DC ... 30 V DC (Via pluggable Push-in terminal block) |
| Spannungseingangssignal | 10 V DC ... 30 V DC |
| Stromausgangssignal | ≤ 50 mA (Not short-circuit proof) |
| Schnittstellenbeschreibung | GSM / GPRS / EDGE / UMTS / HSPA+ / LTE |
| Normen/Vorschriften | EN 61000-4-2 |
| Spannungsausgangssignal | 10 V DC ... 30 V DC (depending on the operating voltage) |
| Beschreibung der Eingabe | Digital input |
| Maximaler Stromverbrauch | 1.7 A |
| Antennenanschlussmethode | SMA (female) |
| Serielle Übertragungsgeschwindigkeit | 10/100 Mbps, auto negotiation |
| Farbe (Oberes Gehäuseteil) | light gray (RAL 7035) |
| Schaltsignal der Stufe "1" | 10 V DC ... 30 V DC |
| Typischer Stromverbrauch | < 200 mA (24 V DC) |
| Elektromagnetische Verträglichkeit | Conformance with RED Directive 2014/53/EU |
| Umgebungstemperatur (Betrieb) | -40 °C ... 70 °C (Maximum transmission power 5 dBm) |
| Zulässige Luftfeuchtigkeit (Betrieb) | 10 % ... 95 % (non-condensing) |
| Einzeldraht-/Anschlusspunkt, flexibel | 0.14 mm² ... 1.5 mm² |
| Einzelleiter/Anschlusspunkt, starr | 0.14 mm² ... 1.5 mm² |
| Umgebungstemperatur (Lagerung/Transport) | -40 °C ... 85 °C |
| Leiterquerschnitt, flexibel [AWG] | 26 ... 16 |
| Zulässige Luftfeuchtigkeit (Lagerung/Transport) | 10 % ... 95 % (non-condensing) |
| Maximale Verlustleistung im Nennbetrieb | 4.8 W |
| Ausgesandte Funkstörungen gemäß EN 55011 | Class B, area of application: Industry and residential |
| Funkstörspannung gemäß EN 55011 | Class B, area of application: Industry and residential |
| Leiterquerschnitt, flexibel, mit Aderendhülse, mit Kunststoffhülse | 0.25 mm² ... 0.75 mm² |
| Leiterquerschnitt flexibel, mit Aderendhülse ohne Kunststoffhülse | 0.25 mm² ... 1.5 mm² |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung