Vorrätig Top‑Produkt
SF2BH88P
SF2BH88P SF2B-H88-P PANASONIC Safety light curtain, hand type, PNP, 1752mm
$0.00USD
3573 auf Lager
Wichtige Spezifikationen
Artikel:Specifications
PFHD:9.37 × 10-9
MTTFD:100 years or more
Details:Min. sensing object ø27 mm ø1.063 in type (20 mm0.787 inbeam pitch)
Lieferanteninformation
PANASONIC
Produkte: 4316
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| PFHD | 9.37 × 10-9 |
| MTTFD | 100 years or more |
| Details | Min. sensing object ø27 mm ø1.063 in type (20 mm0.787 inbeam pitch) |
| Produkt | Safety Light Curtain Type 2 |
| Material | Enclosure: AluminiumUpper and lower edges : Die-cast zine alloyInner case: Polycarbonate / Polyester resinCap: PBT |
| Balkenneigung | 20 mm0.787 in |
| Zubehör | MS-SF2B-2(Intermediate supporting bracket):3 setsSF2B-TR27 (Test rod): 1 No. |
| Teilenummer | SF2B-H88-P |
| Produktname | Safety Light Curtain Type 2 SF2B Ver.2 |
| Netzspannung | 24 V DC plus or minus 15 % Ripple P-P 10 % or less |
| Ansprechzeit | OFF response: 15 ms or lessON response: 40 to 60 ms |
| Produktnummer | SF2B-H88-P |
| Kabelverlängerung | Extension up to total 30.5 m100.066 ftis possible for both emitter and receiver, with optional mating cables. |
| Betriebsbereich | 0.2 to 13 m0.656 to 42.651 ft(0.2 to 5 m0.656 to 16.404 ftwhen using the SF2B-CB05-B adapter cable) |
| Umgebungsfeuchtigkeit | 30 to 85 % RH, Storage: 30 to 95 % RH |
| Emitterelement | Infrared LED (Peak emission wavelength: 870 nm0.034 mil) |
| Stoßfestigkeit | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| Verbindungsmethode | Connector |
| Schutzhöhe | 1,752 mm68.976 in |
| Umgebungsbeleuchtungsstärke | Incandescent light: 3,500 lx or less at the light-receiving face |
| Umgebungstemperatur | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃-13 to +158 ℉ |
| Aktueller Verbrauch | Emitter: 80 mA or lessReceiver: 150 mA or less |
| Mindestens Erfassungsobjekt | ø27 mm ø1.063 in opaque object |
| Anzahl der Strahlkanäle | 88 |
| Vibrationsfestigkeit | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Isolationswiderstand | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Hilfsausgang (Aux) | PNP open-collector transistor- Max. source current: 60 mA- Applied voltage: same as supply voltage [between the auxiliary output and +V]- Residual voltage: 2.5 V or less (sink current 60 mA)(when using 30.5 m100.066 ftlength cable)(Note) When using auxiliary output (AUX), the SF2B-CB05-B adapter cable (optional) cannot be used. |
| Emissionsstoppfunktion | Incorporated |
| Synchronisierungsmethode | Cable synchronization (optical synchronization when using SF2B-CB05-B) |
| Effektiver Öffnungswinkel | plus or minus 5℃ or less [for an operating range exceeding 3 m9.843 ft(conforming to IEC 61496-2 / UL 61496-2)] |
| Anwendbare Normen: Japan | JIS B 9704-1/2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508 (SIL1) |
| Einhaltung der CE-Kennzeichnungsrichtlinie | Machinery Directive, EMC Directive, RoHS Directive |
| Anwendbare Normen: Europa (EU) | EN 61496-1 (Type 2), EN 55011 |
| Steuerausgänge (OSSD 1, OSSD 2) | PNP open-collector transistor- Max. source current: 200 mA- Applied voltage: same as supply voltage [between the control output (OSSD 1, OSSD 2) and +V]- Residual voltage: 2.5 V or less (sink current 200 mA) (when using 30.5 m100.066 ftlength cable) |
| Störungsverhinderungsfunktion | Incorporated- Series connection: 3 sets max. (Total 128 beam channels). (However, SF2B-Ax allows up to a total of 96 beam channels when two sets are connected, and up to 64 beam channels when three sets are connected). (Note 1)SF2B-Hx and SF2B-Ax can be used together. (Note 2)[When using SF2B-CB05-B (optical synchronization):- Series connection: 3 sets max. (Total 128 beam channels). (However, SF2B-Ax allows up to a total of 96 beam channels when two sets are connected, and up to 64 beam channels when three sets are connected). (Note 1)- Parallel connection: 2 sets max.- Series and parallel mixed connection: Series connection of 3 sets max. and parallel connection of 2 sets max. are simultaneously possible.SF2B-Hx and SF2B-Ax can be used together. (Note 2)](Note 1) The SF2B-H8-x and SF2B-A4-x cannot be connected in series.(Note 2) When making series connection mixing SF2B-Hx and SF2B-Ax, calculate by doubling the number of optical axes only for SF2B-Ax, and make the total number of optical axes fall below 128 axes.(e.g.) When making series connection with SF2B-H36 and SF2B-A44, the total number of optical axes will be 124 axes. The number of optical axes for SF2B-H36 + (number of optical axes for SF2B-A44 × 2) = total number of optical axes. 36 optical axes + (44 optical axes × 2) = 124 optical axes. |
| Anwendbare Normen: Nordamerika | UL 61496-1/2 (Type 2), UL 508, UL 1998 (Class 1), CSA C22.2 No.14, CSA C22.2 No.0.8, OSHA 1910.212 (Note), OSHA 1910.217 (C) (Note), ANSI B11.1 to B11.19, ANSI/RIA 15.06(Note) Not compatible when using the bottom cap cable SF2B-CB05-A. |
| Funktion zur Überwachung externer Geräte | Incorporated |
| Hilfsausgang (Aux): Betriebsmodus | When using SF2B-CCBx or SF2B-CBx: OFF when OSSD ON, ON when OSSD OFFWhen using SF2B-CB05-A: ON during normal operation, OFF when there is a problem with emitter operation or emission is halted |
| Gewicht (Gesamtgewicht von Sender und Empfänger) | 2,300 g approx. |
| Hilfsausgang (Aux): Schutzschaltung | Incorporated |
| Anwendbare Normen: Internationaler Standard | IEC 61496-1/2 (Type 2), ISO 13849-1 (Category 2, PLc), IEC 61508-1 to 7 (SIL1) |
| Umweltbeständigkeit: Schutzgrad | IP65 (IEC) (*IP67 is later than Ver.2) |
| Steuerausgänge (OSSD 1, OSSD 2): Betriebsmodus | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the Safety Light Curtain or the synchronization signal) |
| Steuerausgänge (OSSD1, OSSD2): Schutzschaltung | Incorporated |
| Umweltbeständigkeit: Durchschlagsfestigkeit | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Produktbeschreibung
More details
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
