

| Parameter | Wert |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Codierung | B |
| Abgeschirmt | yes |
| Abschirmung | Braided copper wires |
| Kabeltyp | INTERBUS |
| Kopfdesign | Plug |
| Sicherheitshinweis | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Sensortyp | INTERBUS |
| Beschleunigung | 3.2 m/s² |
| Kabellänge | 5 m |
| Kabelgewicht | 70 kg/km |
| Produktart | Circular connectors (device side) |
| Signalgeschwindigkeit | 0.66 c |
| Montageart | Rear mounting |
| Gesamtwendung | 3 pairs to the core |
| Dichtungsmaterial | FKM |
| Verdrehte Paare | 2 cores to the pair |
| Biegeradius | 120 mm |
| Kabelkapazität | ≤ 60 nF/km (At 800 Hz) |
| Wellenimpedanz | 120 Ω ±20 % (at 64 kHz) |
| AWG-Signalleitung | 24 |
| Kabelstruktur | 3 x 2 x 0.22 mm² |
| Schleifenwiderstand | ≤ 159.80 Ω/km |
| Pfad durchqueren | 10 m |
| Traversierungsgeschwindigkeit | 1.6 m/s |
| Flammbeständigkeit | according to VDE 0472, Part 4, test type B |
| Kopfgewindetyp | M12 |
| Kabelausgang am Kopfende | straight |
| Kopfverriegelungstyp | SPEEDCON |
| Leitermaterial | Bare Cu litz wires |
| Nennstrom IN | 4 A |
| Nennspannung UN | 48 V AC |
| Hinweise zum Betrieb | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Einzeldraht, Farbe | green-yellow, white-brown, gray-pink |
| Kopplungswiderstand | < 250.00 mΩ/m (at 30 MHz) |
| Verschmutzungsgrad | 3 |
| Maßzeichnung | |
| Anzahl der Positionen | 5 |
| Bemessungsstoßspannung | 1.5 kV |
| Übertragungsmedium | Copper |
| Schutzgrad | IP67 (When plugged in) |
| Anzahl der Kabelanschlüsse | 1 |
| Überspannungskategorie | II |
| Signalart/-kategorie | INTERBUS |
| Standardbezeichnung | M12 connector |
| Isolationswiderstand | 100 MΩ |
| Äußere Hülle, Farbe | may green RAL 6017 |
| Nennspannung, Kabel | 250 V (Peak value, not for high-power applications) |
| Äußere Hülle, Material | PUR |
| Prüfspannung Kern/Kern | 1500 Vrms |
| Leiterquerschnitt | 3x 2x 0.22 mm² |
| Außendurchmesser des Kabels | 8.00 mm |
| Material Drahtisolierung | PE |
| Anzahl der Biegezyklen | 5000000 |
| Normen/Spezifikationen | IEC 61076-2-101 |
| Prüfspannung Kern/Abschirmung | 1000.00 Vrms |
| Kabeltyp (Abkürzung) | 900 |
| Kabelisolationswiderstand | ≥ 5 GΩ*km |
| Einführ-/Entfernungszyklen | > 100 |
| Umgebungstemperatur (Betrieb) | -30 °C ... 70 °C (Cable, flexible installation) |
| Leiterstruktur-Signalleitung | 32x 0.10 mm |
| Nahfeld-Übersprechdämpfung (NEXT) | ≥ 61 dB (at 772 kHz) |
| Brennbarkeitsklasse gemäß UL 94 | V0 |
| Minimaler Biegeradius, feste Installation | 7.5 x D |
| Minimaler Biegeradius, flexible Installation | 15 x D |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung