

| Parameter | Wert |
|---|---|
| 24 V DC | |
| Breite | 16 mm |
| Höhe | 27.5 mm |
| Länge | 26.8 mm |
| Abgeschirmt | no |
| Kopfdesign | Valve connector |
| Sensortyp | Universal |
| Produktart | Valve connectors |
| Montagehinweis | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Befestigungsschrauben | M3 x 27 |
| Dichtungsmaterial | NBR |
| Statusanzeige | LED (yellow) |
| Artikelüberarbeitung | 02 |
| Kontaktmaterial | CuZn |
| Kopfgewindetyp | CI (9.4 mm) |
| Außendurchmesser | 4 mm ... 6 mm |
| Verbindungsmethode | Screw connection |
| Anzugsmoment | 1.6 Nm ±0.2 Nm (Pressure screw) |
| Kontaktwiderstand | ≤ 4 mΩ |
| Nennstrom IN | 1.5 A |
| Nennspannung UN | 24 V AC |
| Schutzschaltung | Surge protection; Varistor |
| Verschmutzungsgrad | 3 |
| Maßzeichnung | |
| Anzahl der Positionen | 3 |
| PG-Schraubverbindung | M12 |
| Schutzgrad | IP65 |
| Anzahl der Kabelanschlüsse | 1 |
| Überspannungskategorie | II |
| Isolationswiderstand | > 2 GΩ |
| Statusanzeige vorhanden | Yes |
| Leiterquerschnitt | 0.25 mm² ... 0.5 mm² |
| Kontaktflächenmaterial | CuSn |
| Einführ-/Entfernungszyklen | 50 (Valve connector) |
| Material Gehäuse Ventilstopfen | PA |
| Anschlussquerschnitt AWG | 24 ... 20 |
| Umgebungstemperatur (Betrieb) | -25 °C ... 60 °C (valve plug) |
| Brennbarkeitsklasse gemäß UL 94 | HB |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung