

| Parameter | Wert |
|---|---|
| 4 Nm (Pressure nut with coupling sleeve) | |
| Notiz | In line with |
| Codierung | A |
| Länge | 53 mm |
| Allgemein | NOTE:Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
| Abgeschirmt | yes |
| Kopfdesign | Plug |
| Sensortyp | Universal |
| Kabelanschluss | angled |
| Produktart | Circular connector (cable-side) |
| Dichtungsmaterial | NBR |
| Gehäusedurchmesser | 22 mm |
| Kopfgewindetyp | M12 |
| Außendurchmesser | 4.5 mm ... 7.5 mm |
| Verbindungsmethode | Crimp connection |
| Kabelausgang am Kopfende | angled |
| Kopfverriegelungstyp | Push-Pull |
| Anzugsmoment | 1.5 Nm (Screw plug insert with sleeve housing as far it will go) |
| Nennstrom IN | 2 A |
| Nennspannung UN | 30 V AC |
| Verschmutzungsgrad | 3 |
| Maßzeichnung | |
| Anzahl der Positionen | 8 |
| Bemessungsstoßspannung | 0.8 kV |
| Schutzgrad | IP65 |
| Anzahl der Kabelanschlüsse | 1 |
| Überspannungskategorie | II |
| Signalart/-kategorie | Universal |
| Standardbezeichnung | M12 connector |
| Montageanleitung | Contacts can be clipped in place and unclipped without tools |
| Isolationswiderstand | ≥ 100 MΩ |
| Material des Griffkörpers | Zinc die-cast, nickel-plated |
| Schlüsselweite, Überwurfmutter | 15 mm |
| Verbindungsquerschnitt | 0.14 mm² ... 0.34 mm² (flexible) |
| Normen/Spezifikationen | IEC 61076-2-101 |
| Schlüsselweite, Kontermutter | 14 mm |
| Einführ-/Entfernungszyklen | ≥ 100 |
| Anschlussquerschnitt AWG | 26 ... 22 (flexible) |
| Werkstoff für Schraubverbindung | PA 6.6 |
| Umgebungstemperatur (Betrieb) | -40 °C ... 85 °C (Plug / socket) |
| Brennbarkeitsklasse gemäß UL 94 | V0 |
| Abisolierlänge des einzelnen Drahtes | 4 mm +0,5 mm |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung