

| Parameter | Wert |
|---|---|
| 0.8 Nm (Connector with coupling sleeve) | |
| Codierung | A |
| Länge | 61 mm |
| Abgeschirmt | yes |
| Anwendung | Data |
| Kopfdesign | Plug |
| Sensortyp | Ethernet |
| Kabelanschluss | straight |
| Produktart | Circular connector (cable-side) |
| Montagehinweis | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Dichtungsmaterial | Neoprene |
| Kontaktmaterial | CuSn |
| Gehäusedurchmesser | 19 mm |
| Kopfgewindetyp | M12 |
| Außendurchmesser | 4 mm ... 8 mm |
| Verbindungsmethode | Insulation displacement connection |
| Kabelausgang am Kopfende | straight |
| Anzugsmoment | 0.4 Nm (M12 knurl) |
| Kontaktwiderstand | ≤ 5 mΩ |
| Nennstrom IN | 2 A |
| Nennspannung UN | 30 V AC |
| Verschmutzungsgrad | 3 |
| Maßzeichnung | |
| Anzahl der Positionen | 8 |
| Bemessungsstoßspannung | 0.8 kV |
| Schutzgrad | IP67 |
| Anzahl der Kabelanschlüsse | 1 |
| Überspannungskategorie | II |
| Signalart/-kategorie | Ethernet CAT5 (based on IEC 11801), 1 Gbps |
| Standardbezeichnung | M12 connector |
| Isolationswiderstand | ≥ 100 MΩ |
| Material des Griffkörpers | Zinc die-cast, nickel-plated |
| Verbindungsquerschnitt | 0.14 mm² ... 0.34 mm² |
| Kontaktträgermaterial | PA 6 |
| Kontaktflächenmaterial | Ni/Au |
| Normen/Spezifikationen | according to IEC 61076-2-101 |
| Einführ-/Entfernungszyklen | ≥ 100 |
| Anschlussquerschnitt AWG | 26 ... 22 |
| Werkstoff für Schraubverbindung | Brass, nickel-plated |
| Umgebungstemperatur (Montage) | -5 °C ... 50 °C |
| Umgebungstemperatur (Betrieb) | -40 °C ... 85 °C (Plug / socket) |
| Brennbarkeitsklasse gemäß UL 94 | V0 |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung