

| Parameter | Wert |
|---|---|
| The connector pin assignment can be rotated 180° to the cable outlet | |
| Breite | 13 mm |
| Codierung | A |
| Höhe | 32.5 mm |
| Länge | 46 mm |
| Abgeschirmt | no |
| Kopfdesign | Plug |
| Sensortyp | Universal |
| Kabelanschluss | angled |
| Produktart | Circular connector (cable-side) |
| Montagehinweis | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Dichtungsmaterial | NBR |
| Artikelüberarbeitung | 00 |
| Kontaktmaterial | CuZn |
| Gehäusedurchmesser | 13 mm |
| Kopfgewindetyp | M8 |
| Außendurchmesser | 3.5 mm ... 5 mm |
| Verbindungsmethode | Screw connection |
| Kabelausgang am Kopfende | angled |
| Anzugsmoment | 0.2 Nm (M8 knurl) |
| Kontaktwiderstand | ≤ 3 mΩ |
| Nennstrom IN | 4 A |
| Nennspannung UN | 48 V AC |
| Verschmutzungsgrad | 3 |
| Maßzeichnung | |
| Anzahl der Positionen | 3 |
| Bemessungsstoßspannung | 1.5 kV |
| Schutzgrad | IP67 |
| Anzahl der Kabelanschlüsse | 1 |
| Überspannungskategorie | III |
| Signalart/-kategorie | Universal |
| Standardbezeichnung | M8 connector |
| Isolationswiderstand | ≥ 100 MΩ |
| Material des Griffkörpers | PBT |
| Verbindungsquerschnitt | 0.14 mm² ... 0.5 mm² (without ferrule) |
| Kontaktträgermaterial | PA |
| Kontaktflächenmaterial | Au |
| Normen/Spezifikationen | IEC 61076-2-104 |
| Einführ-/Entfernungszyklen | ≥ 100 |
| Anschlussquerschnitt AWG | 26 ... 20 (without ferrule) |
| Werkstoff für Schraubverbindung | Brass, nickel-plated |
| Umgebungstemperatur (Betrieb) | -40 °C ... 85 °C (Plug / socket) |
| Brennbarkeitsklasse gemäß UL 94 | HB |
| Abisolierlänge des einzelnen Drahtes | 4 mm |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung