

| Parameter | Wert |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Codierung | A |
| Abgeschirmt | no |
| Kabeltyp | PVC litz wire |
| Kopfdesign | Socket |
| Sicherheitshinweis | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Sensortyp | Universal |
| Gewindeart | M12 |
| Kabellänge | 0.5 m |
| Produktart | Circular connectors (device side) |
| Montagehinweis | With flat nut |
| Montageart | Rear mounting Pg9 With flat nut |
| Dichtungsmaterial | FKM |
| Artikelüberarbeitung | 11 |
| Kontaktmaterial | CuZn |
| Kopfgewindetyp | M12 |
| Verbindungsmethode | Individual wires |
| Kabelausgang am Kopfende | straight |
| Kopfverriegelungstyp | SPEEDCON |
| Anzugsmoment | 2 Nm ... 3 Nm (Installation-side) |
| Leitermaterial | Tin-plated Cu litz wires |
| Nennstrom IN | 4 A |
| Nennspannung UN | 60 V |
| Hinweise zum Betrieb | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Bestellinformationen: | Lock nut is included in the scope of delivery |
| Einzeldraht, Farbe | black, brown,blue, white, gray |
| Kabelquerschnitt | 0.5 mm² |
| Verschmutzungsgrad | 3 |
| Anzahl der Positionen | 5 |
| Schutzgrad | IP67 (When plugged in) |
| Anzahl der Kabelanschlüsse | 1 |
| Überspannungskategorie | III |
| Signalart/-kategorie | Universal |
| Standardbezeichnung | M12 connector |
| Leiterquerschnitt | 0.5 mm² |
| Kontaktverbindungstyp | Socket |
| Kontaktträgermaterial | PA 6.6 |
| Kontaktflächenmaterial | Au |
| Material Drahtisolierung | PVC |
| Normen/Spezifikationen | IEC 61076-2-101 |
| Einführ-/Entfernungszyklen | > 100 |
| Werkstoff für Schraubverbindung | Zinc die-cast, nickel-plated |
| Drahtdurchmesser inkl. Isolierung | 1.8 mm |
| Brennbarkeitsklasse gemäß UL 94 | V0 |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung