

| Parameter | Wert |
|---|---|
| IP67, when in locked state | |
| Notiz | Push-pull |
| Allgemein | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Material | Brass, nickel-plated |
| Kopfdesign | Pin |
| Gewindeart | M12 |
| Produktart | Panel mounting base |
| Montageart | Rear mounting |
| Dichtungsmaterial | FKM |
| Kopfgewindetyp | M12 |
| Verbindungsmethode | SMD |
| Querschnitt AWG | (converted acc. to IEC) |
| Kopfverriegelungstyp | Push-Pull |
| Schutzgrad | IP67 (correctly plugged in and locked) |
| Standardbezeichnung | M12 connector |
| Material des Griffkörpers | Brass, nickel-plated |
| Normen/Spezifikationen | IEC 61076-2-010 |
| Einführ-/Entfernungszyklen | > 100 |
| Werkstoff für Schraubverbindung | Brass, nickel-plated |
| Umgebungstemperatur (Betrieb) | -40 °C ... 85 °C (without mechanical actuation) |
| Schutzgrad (im eingesteckten Zustand) | IP67 (correctly plugged in and locked) |
| Brennbarkeitsklasse gemäß UL 94 | V0 |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung