


| Parameter | Wert |
|---|---|
| Oh | 330, 350, 400, 550, 600, 1000 |
| Lüfter | Yes |
| Name | RCB-1600-12 |
| Zustand | Recommended Model |
| Alarm | Over Temperature, mains Failure, Output OK |
| Format | 19"Rack |
| Serie | RCB-1600 |
| Ausgang 1 | +12 |
| Genehmigungen | CE, UL |
| Schnittstelle | I2C, PMBus |
| Leistung (W) | 1.440,00 |
| Subformato | 1U |
| Breite (mm) | 85.00 |
| Höhe (mm) | 41.00 |
| AC-Eingangsleistung Max. | 264,00 |
| Mindesteingangsleistung (AC): Mindestens | 90,00 |
| Anwendungen | Industrial, Telecommunications |
| Akku-Typ | AGM, Wet, Li-ion |
| Hersteller | MEAN WELL |
| Produktart | Chargers |
| Ladestufen | Three |
| Isolation (V) | 3.000,00 |
| Eingangsanschluss | Pin |
| Eingangsfrequenz | 50 Hz, 60 Hz |
| Lang/Hintergrund | 300.00 |
| Lange Beschreibung | Battery charger for 19" Rack programmable via ITwoC and PMBus.Load in 3 stages.FormatRack 19".Range of universal input90-264vac. 47-63Hz.Absorption voltageTo 14.4 Vdc.Float voltageTo 13.8 Vdc. Adjustable by potentiometer (to 11.5-15vdc). ProgrammableITwoC and PMBusfrom 75% to 125%.Intensity of load100A. ProgrammableITwoC and PMBusfrom 20% to 100%.Power:1440W.Type of batteries:Gel, AGM, wet, Lithium-Iron and Lithium-Magnesium.Battery capacity:330-1000Ah.Efficiency typical:Total of 90.5%.Paralelizable up to 5 units with sharing of active current and diode mosfet protection in the Rack RHP-1U.Hot Swapt. Change in hot.Factor corrector, power>0,97to 230vac at full load.Remote on / off.Auxiliary output and 5V 0.3 A.3-color LED charging status indicator.Working temperature: from-30up+70 ° Cof ambient temperature. Consult the technical data sheet to see the curves of drift.Dimensions (Length x Width x Height) [mm]:300 x 85 x 41.5 years of warranty.Manufacturer: MEAN WELL.The chargers of the series RCB-1600 are designed to install in the Rack RHP-1U supports up to 5 chargers CPR-1600. These chargers allow you to charge lead acid batteries, Gel, AGM, wet, Lithium-Iron and Lithium-Manganese with possibility to configure the load curves by using ITwoC and PMBus, and optionally via CANBus. We can schedule the tensions of absorption, charge current and float voltage to suit to our batteries. Can be connected in parallel up to 5 chargers protected between them using a diode, Mosfet protection of investment of the integrated current. They have a wide range of temperature from -30ºC up to +70ºC. The tension can also be adjusted via a potentiometer. Have a high efficiency and auxiliary output of 5V. Hot Swapt or hot-swap allows us to replace any damaged equipment without having to stop the system, or to increase the power at any time. The chargers of the series RCB-1600 offers the maximum flexibility to adapt to any type of batteries. |
| Ausgangsanschluss | Screw-Type |
| Art des Eintrags CA | Single-phase |
| Garantie (Jahre) | 5,00 |
| Ursprungsland | Taiwan |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung