

| Parameter | Wert |
|---|---|
| High demand | |
| Tiefe | 99 mm |
| Schock | 15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.) |
| Breite | 22.5 mm |
| Höhe | 114.5 mm |
| Kategorie | 1 |
| steckbar | yes |
| Relais-Typ | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Anwendung | Safe switch off |
| Zertifikat | CE-compliant |
| Ausgangssicherung | 10 A gL/gG (N/O contact) |
| Produktart | Coupling relay |
| Neustartzeit | < 1 s (Boot time) |
| Schraubengewinde | M3 |
| Montageart | DIN rail mounting |
| Erholungszeit | < 500 ms |
| Stoppkategorie | 0 |
| Einschaltstrom | typ. 350 mA DC (Δt s) |
| Produktfamilie | PSRclassic |
| Farbe (Gehäuse) | yellow (RAL 1018) |
| Artikelüberarbeitung | 06 |
| Kontaktmaterial | AgSnO2 |
| Gehäusematerial | Polyamide |
| Maximale Höhe | max. 2000 m (Above sea level) |
| Abstreiflänge | 7 mm |
| Verbindungsmethode | Screw connection |
| Montageposition | vertical or horizontal |
| Quadratischer Gesamtstrom | 72 A2 |
| Anzugsmoment | 0.6 Nm |
| Schutzschaltung | Surge protection; Varistor |
| Schaltkapazität | min. 50 mW |
| Eingangsspannungsbereich | 20.4 V AC/DC ... 26.4 V AC/DC |
| Hinweis zur Anwendung | Only for industrial use |
| Schutzgrad | IP20 |
| Typische Veröffentlichungszeit | typ. 20 ms (when controlled via A1) |
| Normen/Vorschriften | DIN EN 50178 |
| Vibration (Betrieb) | 10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.) |
| Kontaktschaltart | 5 enabling current paths |
| Maximaler Einschaltstrom | 6 A |
| Nominaler Betriebsmodus | 100% operating factor |
| Leistungsniveau (PL) | c |
| Einschaltstrom, Minimum | 10 mA |
| Mechanische Lebensdauer | 10x 106cycles |
| Stromverbrauch in den USA | typ. 1.2 W |
| Bemessungsisolationsspannung | 250 V |
| Maximale Schaltspannung | 230 V AC/DC (Observe the load curve) |
| Minimale Schaltspannung | 5 V AC/DC |
| Anzeige der Betriebsspannung | 1 x green LED |
| Typische Startzeit bei uns | typ. 20 ms (when controlled via A1) |
| Leiterquerschnitt AWG | 24 ... 12 |
| Begrenzung des Dauerstroms | 6 A (N/O contact) |
| Maximale Schaltfrequenz | 0.5 Hz |
| Sicherheitsintegritätsniveau (SIL) | 1 |
| Leiterquerschnitt starr | 0.2 mm² ... 2.5 mm² |
| Bemessungsstoßspannung/Isolierung | 4 kV / basic isolation (safe isolation, reinforced isolation and 6 kV between A1/A2, 53/54, 71/72 and 13/14, 23/24, 33/34, 43/44.) |
| Umgebungstemperatur (Betrieb) | -20 °C ... 55 °C |
| Bemessungssteuerstrom IS | typ. 47 mA |
| Leiterquerschnitt flexibel | 0.2 mm² ... 2.5 mm² |
| Schaltkapazität (360 Zyklen/h) | 4 A (24 V (DC13)) |
| Abschaltvermögen (ohmsche Last) max. | 144 W (N/O contact, 24 V DC, τ = 0 ms) |
| Umgebungstemperatur (Lagerung/Transport) | -40 °C ... 85 °C |
| Bemessungsversorgungsspannung des Steuerkreises (US) | 24 V AC/DC -15 % / +10 % |
| Mindestschutzgrad des Anlagenstandorts | IP54 |
| Maximales Abschaltvermögen (induktive Last) | 42 W (N/O contact, 24 V DC, τ = 40 ms) |
| Maximal zulässige Luftfeuchtigkeit (Lagerung/Transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximal zulässige relative Luftfeuchtigkeit (Betrieb) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximale Verlustleistung im Nennbetrieb | 8.56 W (at UB= 26.4 V DC, US= 24 V, IS= 47 mA, n = 1, IL² = 72 A², Rcontact= 0.1 ) |
| Schaltleistung gemäß IEC 60947-5-1 | 3 A (24 V (DC13)) |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung