

| Parameter | Wert |
|---|---|
| High demand | |
| Tiefe | 114.5 mm |
| Schock | 15g |
| Breite | 17.5 mm |
| Höhe | 112.2 mm |
| steckbar | yes |
| CCCex-Notiz | Use in potentially explosive areas is not permitted in China. |
| Relais-Typ | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Anwendung | Safe switch off |
| Zertifikat | UL 22 ATEX 2912X |
| Bezeichnung | A1/A2 |
| Filterzeit | 10 ms (24 V DC, A1 in the event of voltage dips at Us) |
| Ausgangssicherung | 6 A gL/gG |
| Produktart | Coupling relay |
| Schraubengewinde | M3 |
| Montagehinweis | See derating curve |
| Montageart | DIN rail mounting |
| Erholungszeit | < 500 ms |
| Stoppkategorie | 0 |
| Scheinleistung | typ. 4.1 VA |
| Identifikation | II 3G Ex ec nC IIC T4 Gc |
| Einschaltstrom | typ. 16 A (Δt s) |
| Produktfamilie | PSRmini |
| Statusanzeige | 1 x LED (green), 1 x LED (yellow) |
| Farbe (Gehäuse) | yellow (RAL 1018) |
| Artikelüberarbeitung | 04 |
| Kontaktmaterial | AgSnO2 |
| Gehäusematerial | Polyamide |
| Maximale Höhe | ≤ 2000 m (Above sea level) |
| Abstreiflänge | 7 mm |
| Verbindungsmethode | Screw connection |
| Montageposition | vertical or horizontal |
| Anzahl der Ausgänge | 2 (undelayed) |
| Quadratischer Gesamtstrom | 72 A2(observe derating) |
| Schaltspannung | min. 12 V AC/DC |
| Ausgabebeschreibung | safety-related N/O contacts |
| Schutzschaltung | Surge protection; Varistor 275 V |
| Schaltkapazität | min. 60 mW |
| Eingangsstrom an UD | < 5 mA (at terminal blocks 24V/GND at UD) |
| Hinweis zur Anwendung | Only for industrial use |
| Schaltfrequenz | max. 1 Hz |
| Schutzgrad | IP20 |
| Typische Veröffentlichungszeit | < 200 ms (with Uswhen controlled via A1) |
| Normen/Vorschriften | EN 60664-1, EN 60079-7, EN 60079-15 |
| Typische Reaktionszeit | < 100 ms (with Uswhen controlled via A1) |
| Vibration (Betrieb) | 10 Hz ... 150 Hz, 2g |
| Kontaktschaltart | 2 enabling current paths |
| Nominaler Betriebsmodus | 100% operating factor |
| Mechanische Lebensdauer | 10x 106cycles |
| Stromverbrauch in den USA | 1.8 W (with DC) |
| Bemessungsisolationsspannung | 250 V AC |
| Anzeige der Betriebsspannung | 1 x yellow LED |
| Leiterquerschnitt AWG | 24 ... 12 |
| Begrenzung des Dauerstroms | 6 A (observe derating) |
| Diagnoseversorgungsspannung UD | 24 V DC -15 % / +10 % |
| Sicherheitsintegritätsniveau (SIL) | 3 (Reference IEC 61508) |
| Leiterquerschnitt starr | 0.2 mm² ... 2.5 mm² |
| Bemessungsstoßspannung/Isolierung | Basic insulation 4 kV between all current paths and housing |
| Umgebungstemperatur (Betrieb) | -40 °C ... 70 °C (observe derating) |
| Bemessungssteuerstrom IS | 75 mA (24 V DC) |
| Leiterquerschnitt flexibel | 0.2 mm² ... 2.5 mm² |
| Schaltkapazität (360 Zyklen/h) | 4 A (24 V (DC13)) |
| Umgebungstemperatur (Lagerung/Transport) | -40 °C ... 85 °C |
| Bemessungsversorgungsspannung des Steuerkreises (US) | 24 V AC/DC ... 230 V AC/DC -15 % ... +10 % |
| Mindestschutzgrad des Anlagenstandorts | IP54 |
| Maximal zulässige Luftfeuchtigkeit (Lagerung/Transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximal zulässige relative Luftfeuchtigkeit (Betrieb) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximale Verlustleistung im Nennbetrieb | 5.7 W (at IL² = 72 A²) |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung