

| Parameter | Wert |
|---|---|
| RS-422 | |
| EMV | B |
| MTBF | 10 Years (Telcordia standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day)) |
| MTTF | 1654 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| Notiz | Please follow the special installation instructions in the documentation! |
| Tiefe | 114.5 mm |
| Eingang | ± 2.2 kV (Test Level 3) |
| Breite | 22.5 mm |
| Höhe | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
| Signal | Modbus |
| Stromspannung | 10 V |
| Kommentare | Criterion B |
| EMV-Hinweis | EMC: class A product, see manufacturer's declaration in the download area |
| Luftfeuchtigkeit | A |
| Bitverzögerung | ≤ 2.5 µs |
| Gehäuse | Required protection according to the Rules shall be provided upon installation on board |
| Schnittstelle | RS-232/-485 |
| Vibration | A |
| CCCex-Notiz | Use in potentially explosive areas is not permitted in China. |
| Anwendung | RS-232 |
| Zertifikat | CE-compliant |
| Kriterium A | Normal operating behavior within the specified limits. |
| Kriterium B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Temperatur | B |
| Produktart | Interface converter |
| Montageart | DIN rail mounting |
| Bitverzerrung | ≤ 5 % |
| Identifikation | II 3 G Ex nA IIC T4 Gc |
| Geräuschemission | EN 61000-6-4 |
| Störfestigkeit | EN 61000-6-2:2005 |
| Pinbelegung | DTE/DCE switchover via switch |
| Farbe (Gehäuse) | green (RAL 6021) |
| Feldstärke | 10 V/m |
| Frequenzbereich | 26 MHz ... 3 GHz (Test Level 3) |
| Artikelüberarbeitung | 22 |
| Entladung in der Luft | ± 8 kV (Test Level 3) |
| Verschmutzungsgrad | 2 |
| Verbindungsmethode | D-SUB 9 plug |
| Kontaktentladung | ± 6 kV (Test Level 3) |
| Anzugsmoment | 0.56 Nm ... 0.79 Nm |
| Material (Gehäuse) | PA 6.6-FR |
| Maßzeichnung | |
| Hinweis zur Anwendung | Only for industrial use |
| Unterstützte Protokolle | transparent protocol |
| Übertragungslänge | 15 m (shielded twisted pair) |
| Schutzgrad | IP20 |
| Elektrische Trennung | VCC // V.24 (RS-232) // RS-485 |
| Versorgungsspannungsbereich | 18 V AC/DC ... 30 V AC/DC (via pluggable COMBICON screw terminal block) |
| Abschlusswiderstand | 390 Ω |
| Normen/Vorschriften | EN 61000-4-2 |
| Übertragungskanäle | 2 (1/1), RxD, TxD, full duplex |
| Nennversorgungsspannung | 24 V AC/DC |
| Umschaltung der Datenrichtung | Automatic control or via RTS/CTS |
| Maximaler Stromverbrauch | 100 mA |
| Serielle Übertragungsgeschwindigkeit | 1.2; 2.4; 4.8; 7.2; 9.6; 19.2; 31.25; 38.4; 57.6; 75; 93.75; 115.2 kbps |
| Typischer Stromverbrauch | 85 mA (24 V DC) |
| Testspannungsdatenschnittstellen | 1.5 kV AC |
| Elektromagnetische Verträglichkeit | Conformance with EMC Directive 2014/30/EU |
| Umgebungstemperatur (Betrieb) | -40 °C ... 70 °C |
| Zulässige Luftfeuchtigkeit (Betrieb) | 10 % ... 95 % (non-condensing) |
| Einzeldraht-/Anschlusspunkt, flexibel | 0.2 mm² ... 2.5 mm² |
| Einzelleiter/Anschlusspunkt, starr | 0.2 mm² ... 2.5 mm² |
| Umgebungstemperatur (Lagerung/Transport) | -40 °C ... 85 °C |
| Leiterquerschnitt, flexibel [AWG] | 24 ... 12 |
| Testspannungsdatenschnittstelle/Stromversorgung | 1.5 kV AC |
| Maximaler AWG-Leiterquerschnitt, flexibel | 12 |
| Mindestquerschnitt des Leiters (AWG), flexibel | 24 |
| Maximale Verlustleistung im Nennbetrieb | 2.04 W |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung