

| Parameter | Wert |
|---|---|
| • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. | |
| Farbe | black |
| Breite | 34.5 mm |
| Codierung | AD |
| Höhe | 38.4 mm |
| Länge | 179.5 mm |
| Material | PPE (Nut) |
| Sicherheitshinweis | • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. |
| Gewindeart | M25 x 1,5 () |
| Kabellänge | 150 mm |
| halogenfrei | no |
| Produktart | Panel feed-through |
| Lochdurchmesser | 25.5 mm |
| Montageart | Rear mounting |
| Bemessungsstrom | 24 A (With 2.5 mm² conductor cross section in accordance with IEC 61984) |
| Dichtungsmaterial | Silicon |
| Produktfamilie | PRC 35 |
| Auszugskraft | 150 N ±50 N |
| Einführkraft | 30 N ±10 N |
| O-Ring-Material | Silicon |
| Artikelüberarbeitung | 13 |
| Kontaktmaterial | Cu alloy |
| Gehäusematerial | PPE |
| Schutzklasse | II (double or reinforced insulation) |
| Anzugsmoment | 2.5 Nm ±0.1 Nm (Tightening torque nut) |
| Verbindungsprofil | 2+PE |
| Bestellinformationen: | This item is also available with other cable lengths. For your specific requirements, please contact your local PHOENIX CONTACT subsidiary. |
| Einzeldraht, Farbe | brown, blue, green/yellow |
| Kabelquerschnitt | 2.5 mm² |
| Verschmutzungsgrad | 2 |
| Maßzeichnung | |
| Nennspannung ATD | 690 V AC (III/2.00) in accordance with IEC 61984 |
| Hinweis zur Anwendung | For assembly notes, please refer to the packing slip |
| Anzahl der Positionen | 3 |
| Schutzgrad | IP66 / IP68 (2m / 24h) / IP69K |
| Nennspannung (III/2) | 690 V |
| Einzeldraht, Material | PVC |
| Schlüsselweite, Überwurfmutter | 32 mm |
| Kontaktträgermaterial | PPE |
| Kontaktflächenmaterial | Ag |
| Normen/Spezifikationen | IEC 61984:2008 |
| Farbe des Gehäuseteils | black |
| Isoliermaterialgruppe | I / CTI 600 |
| Einzeldraht, Querschnitt | 2.5 mm² |
| Einführ-/Entfernungszyklen | 100 |
| Bemessungsstoßspannung (III/2) | 8 kV |
| Werkstoff für Schraubverbindung | PPE |
| Umgebungstemperatur (Montage) | 5 °C ... 85 °C |
| Drahtdurchmesser inkl. Isolierung | 3.65 mm ±0.15 mm |
| Umgebungstemperatur (Betrieb) | -40 °C ... 105 °C (dependent on the derating curve) |
| Schutzart (nicht angeschlossen) | IP65 (Lengthwise waterproofing) |
| Schutzgrad (im eingesteckten Zustand) | IP66 / IP68 (2m / 24h) / IP69K |
| Brennbarkeitsklasse gemäß UL 94 | V0 |
| Umgebungstemperatur (Lagerung/Transport) | -40 °C ... 70 °C |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung