

| Parameter | Wert |
|---|---|
| Freewheeling diode; Freewheeling diode | |
| EMV | B |
| Notiz | the following values are applicable if a gold layer is destroyed |
| Farbe | gray (RAL 7042) |
| Tiefe | 94 mm |
| Breite | 14 mm |
| Höhe | 80 mm |
| Luftfeuchtigkeit | A |
| Gehäuse | Required protection according to the Rules shall be provided upon installation on board |
| Vibration | B/C |
| Isolierung | Basic insulation |
| Anwendung | Universal |
| Zertifikat | CE-compliant |
| Temperatur | D |
| Produktart | Relay Module |
| Schraubengewinde | M3 |
| Montagehinweis | in rows with zero spacing |
| Montageart | DIN rail mounting |
| Identifikation | ISA-S71.04. G3 Harsh Group |
| Betriebsart | 100% operating factor |
| Produktfamilie | PLC-INTERFACE |
| Artikelüberarbeitung | 09 |
| Kontaktmaterial | AgNi, hard gold-plated |
| Antrieb (Polarität) | polarized |
| Verschmutzungsgrad | 3 |
| Abstreiflänge | 8 mm |
| Verbindungsmethode | Screw connection |
| Montageposition | any |
| Anzugsmoment | 0.6 Nm ... 0.8 Nm |
| Antrieb und Funktion | monostable |
| Schutzschaltung | Reverse polarity protection; Polarity protection diode |
| Schaltkapazität | 2 A (at 24 V, DC13) |
| Eingangsspannungsbereich | 51 V DC ... 84 V DC (20 °C) |
| Bemessungsstoßspannung | 6 kV |
| Überspannungskategorie | III |
| Typische Veröffentlichungszeit | 10 ms |
| Niederspannungsrichtlinie | Conformance with Low Voltage Directive |
| Normen/Vorschriften | IEC 60947-5-1 |
| Typische Reaktionszeit | 8 ms |
| Kontaktschaltart | 2 changeover contacts |
| Maximaler Einschaltstrom | 50 mA |
| Mindestschaltstrom | 1 mA (24 V) |
| Art des Schaltkontakts | Single contact |
| Mechanische Lebensdauer | 3x 107cycles |
| Nenneingangsspannung UN | 60 V DC |
| Maximale Schaltspannung | 30 V AC |
| Minimale Schaltspannung | 100 mV (10 mA) |
| Anzeige der Betriebsspannung | Yellow LED |
| Leiterquerschnitt AWG | 26 ... 14 |
| Begrenzung des Dauerstroms | 50 mA |
| Typischer Eingangsstrom an UN | 10 mA |
| Datum der letzten Datenverwaltung | 01.08.2024 |
| Schutzart (Relais) | RT III (Relay) |
| Leiterquerschnitt starr | 0.14 mm² ... 2.5 mm² |
| Elektromagnetische Verträglichkeit | Conformance with EMC directive |
| Prüfspannung (Wicklung/Kontakt) | 4 kV AC (50 Hz, 1 min., winding/contact) |
| Umgebungstemperatur (Betrieb) | -40 °C ... 60 °C |
| Leiterquerschnitt flexibel | 0.14 mm² ... 2.5 mm² |
| Schutzart (Relaisbasis) | IP20 (Relay base) |
| Abschaltvermögen (ohmsche Last) max. | 1.2 W (at 24 V DC) |
| Brennbarkeitsklasse gemäß UL 94 | V0 (Housing) |
| Umgebungstemperatur (Lagerung/Transport) | -40 °C ... 85 °C |
| Maximale Verlustleistung im Nennbetrieb | 0.6 W |
| Nennspannung (eingestecktes elektromechanisches Relais) | 60 V DC |
| Prüfspannung (Wechselkontakt/Wechselkontakt) | 2.5 kV AC (50 Hz, 1 min., changeover contact/changeover contact) |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung