Vorrätig Top‑Produkt
NPF-120D-20BE
NPF-120D-20BE MEANWELL AC-DC Single output LED Constant current (CC) with Active PFC, Output 20VDC / 6A, 3 i..
$0.00USD
4084 auf Lager
Wichtige Spezifikationen
Name:NPF-120D-20BE
Zustand:New
Format:Box
Serie:NPF-120D-BE
Lieferanteninformation
MEANWELL
Produkte: 6448
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Name | NPF-120D-20BE |
| Zustand | New |
| Format | Box |
| Serie | NPF-120D-BE |
| Dimmen | 0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V |
| Genehmigungen | CCC, CE, EAC, ENEC, UL |
| Leistung (W) | 120,00 |
| Subformato | IP67 |
| Breite (mm) | 63.00 |
| Höhe (mm) | 37.50 |
| AC-Eingangsleistung Max. | 305,00 |
| Mindesteingangsleistung (AC): Mindestens | 90,00 |
| Anwendungen | Lighting |
| Hersteller | MEAN WELL |
| Produktart | LED Driver |
| Isolation (V) | 3.750,00 |
| Spitzenleistung (W) | One hundred twenty |
| Eingangsanschluss | Cable |
| Eingangsfrequenz | 50 Hz, 60 Hz |
| Lang/Hintergrund | 191.00 |
| Lange Beschreibung | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in box waterproof plasticIP67.Input range90-305Vca47-63Hz.Output in constant current6A.Range of output voltage12 to 20vdcaccording to demade the load.Power:120W.Efficiency typical:88.5 per cent.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0,96to 230vac at full load.Outputauxiliary 12V/200mA (it is not regulated, it can vary between 11.4 and is 12.6).Consumption without load <0,50 W.Operating temperature range of caseTcfrom-40ºCup+90ºC.Dimensions (Length x Width x Height):191 x 63 x 37.5 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream. This version has an outputauxiliaryof12V/200mA(it is not regulated, it can vary between 11.4 and is 12.6).This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.You can also work in voltage mode constant giving a fixed voltage of 20V, if a load is fed at constant voltage and does not overcome the maximum output power.With plastic housing, watertight, designed for lighting applications in indoor, decorative, architectural, signage, mobile (roads, screens...) or tunnel lighting. Suitable for damp and wet conditions. Approved HL Class I Division 2 for ex-zones in the US.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Ausgangsanschluss | Cable |
| Art des Eintrags CA | Single-phase |
| Garantie (Jahre) | 5,00 |
| Ursprungsland | China |
| Ausgangsstrom mA | Six thousand |
| Intensität der minimalen Ausgangsleistung (mA) | 6.000,00 |
| Maximale Ausgangsintensität (mA) | 6.000,00 |
Produktbeschreibung
More details
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Technische Details
LED driver dimmable.
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
