

| Parameter | Wert |
|---|---|
| EAN | Four trillion fifty five billion six hundred twenty six million three hundred twenty six thousand one hundred ninety one |
| (Kabel) | No dangerous substances above the thresholds |
| Schlüsselreihenfolge | One million four hundred twenty three thousand one hundred thirty nine |
| (Maßnahmen) | 60 V DC |
| Wichtigste Verkaufsargumente | BF1CJI - |
| Verpackungseinheit | 1 pcs |
| (Allgemeine Daten) | Die-cast zinc, nickel-Connection by screw) |
| Ursprungsland | PL (Poland) |
| ETIM 7.0 (eCl@ss) | EC001262 |
| China RoHS (Kabel) | Space of time for the intended use: unlimited = FEUP-e |
| Farbe (Allgemeine Daten) | black |
| Tarifnummer Tarif | Eighty five million four hundred forty four thousand two hundred ninety |
| eCl@ss 7.0 (Bewertungen) | Twenty seven million sixty thousand three hundred eight |
| eCl@ss 9.0 (Bewertungen) | Twenty seven million sixty thousand three hundred eight |
| Gewicht (Allgemeine Daten) | 10 g ±5 g |
| Kodierung (Allgemeine Daten) | D (Data) |
| Abgeschirmt (Allgemeine Daten) | yes |
| (Werte nominaler Kopf 1) | Die-cast zinc, nickel-Connection by screw) |
| Kategorie Anstieg (Maßnahmen) | II |
| Spannungsdimensionierung (Maße) | 48 V AC |
| Anzahl der Masten (Maße) | Four |
| Verschmutzungsgrad (Maßnahmen) | Three |
| Farbe (Werte nominal Kopf 1) | black |
| Ladezyklen (Allgemeine Daten) | ≥ 100 (Quantity 500 socket anti Phoenix Contact) |
| Kabellänge (Daten kommerziell) | 20,5 m |
| Gewicht (Werte nominale Kopfhöhe 1) | 10 g ±5 g |
| (Normen und Spezifikationen) | -25 °C ... 70 °C (cable, available mobile) |
| Signalart/-kategorie (Messgrößen) | PROFINET CAT5 (IEC 11801), 100 MBit/s |
| Kodierung (Werte nominaler Kopf 1) | D (Data) |
| Abgeschirmt (Werte Nennkopf 1) | yes |
| Anzugsmoment (Allgemeine Daten) | 0.4 Nm |
| Stückgewicht (ohne Verpackung) | 1.331,700 g |
| Konstruktionskopf (Allgemeine Daten) | Connector straight M12 SPEEDCON / IP65 |
| Aktuelle Dimensionierung bei 40 °C (Messwerte) | 4 To |
| Normen/Spezifikationen (Maßnahmen) | Plug-in connector M12 to IEC 61076-2-101 |
| Isolationswiderstand (Allgemeine Daten) | ≥ 100 MΩ |
| Material (Komponenten) (Allgemeine Daten) | CuSn (Contact) |
| Zyklen der Zündkerze (Werte Nennhöhe 1) | ≥ 100 (Quantity 500 socket anti Phoenix Contact) |
| Bezeichnung der Norm (Nennwerte 2 Köpfe) | Plug-in connector M12 |
| Abschirmung (Normen und Spezifikationen) | Polyester film with lined aluminum, mesh of copper wires tinned |
| Raumtemperatur (Service) (Allgemeine Daten) | -40 °C ... 90 °C |
| Bildschirmdimmung (Standards und Spezifikationen) | 60 dB (up to 1 000 MHz) |
| Anzugsmoment (Werte Nennkopf 1) | 0.4 Nm |
| Dämpfung (Normen und Spezifikationen) | 1.5 dB (1 MHz) |
| Konstruktionskopf (Werte nominal Kopf 1) | Female straight M12 SPEEDCON / IP65 |
| Gesamtverkabelung (Standards und Spezifikationen) | Fours star |
| Farbtreiber (Standards und Spezifikationen) | the blue-white, orange-yellow |
| Eigene Impedanz (Normen und Spezifikationen) | 100 Ω ±5 Ω (f = 100 MHz) |
| Geschwindigkeitssignale (Normen und Spezifikationen) | 0,75 c |
| Kabeltyp (Normen und Spezifikationen) | Railway applications PROFINET |
| Isolationswiderstand (Werte bei Nennkopfspannung 1) | ≥ 100 MΩ |
| Material (Komponenten) (Werte Nennkopf 1) | CuSn (Contact) |
| Polzahl (Steckerfront) (Allgemeine Daten) | Four |
| Ölbeständigkeit (Normen und Spezifikationen) | according to en 60684-2, 72 h at 100 °C, IRM 902 |
| Andere Widerstände (Normen und Spezifikationen) | resistant to fuel according to en 60684-2, 72 h h 100 °C IRM 903 |
| Flammbeständigkeit (Normen und Spezifikationen) | according to en 60332-1-2 |
| Signalkabel AWG (Standards und Spezifikationen) | Twenty two |
| Äußere Verpackung, Farbe (Standards und Spezifikationen) | black |
| Abschnitt Fahrer (Standards und Spezifikationen) | 4x 0,34 mm2 |
| Normen/Spezifikationen (Nennwerte 2 Köpfe) | IEC 61076-2-101 |
| Halogenfreiheit (Normen und Spezifikationen) | according to en 50267-2-1 |
| Übertragungsimpedanz (Normen und Spezifikationen) | < 13,00 mΩ/m (f = 1 MHz) |
| Leitfähiges Material (Normen und Spezifikationen) | Conductor Cu tinned |
| Dichte des Rauchgases (Normen und Spezifikationen) | IN 61034-2 |
| Bemessungsspannungskabel (Normen und Spezifikationen) | 125 V |
| Raumtemperatur (Betriebstemperatur) (Werte Nenndruckhöhe 1) | -40 °C ... 90 °C |
| Gewicht des Kabels (Normen und Spezifikationen) | 71 kg/km |
| Kapazität der Anlage (Normen und Spezifikationen) | 44 nF/km (conductor-conductor) |
| Signalart/-kategorie (Normen und Spezifikationen) | PROFINET CAT5 (IEC 11801), 100 MBit/s |
| Kabelkonstruktion (Normen und Spezifikationen) | 1x4xAWG22/7; SF/TQ |
| Impedanz der Leitung (Normen und Spezifikationen) | 100 Ω ±15 Ω (f = 0.5 MHz ... 3 MHz) |
| Isolationswiderstand (Normen und Spezifikationen) | ≥ 5 GΩ*km |
| Außengehäuse, Material (Normen und Spezifikationen) | PE-X |
| Polzahl (Steckerfläche) (Werte Nennkopf 1) | Four |
| Laufzeit von Signalen (Standards und Spezifikationen) | 4,4 ns/m |
| Kabeltyp (Abkürzung) (Normen und Spezifikationen) | Nine hundred thirty nine |
| Außendurchmesser des Kabels D (Normen und Spezifikationen) | 6.6 mm ±0.2 mm |
| Wandstärke der Außenhülle (Normen und Spezifikationen) | 1 mm |
| Rückflussdämpfung (RL) (Normen und Spezifikationen) | 25 dB (1 MHz) |
| Raumtemperatur (Betrieb) (Normen und Spezifikationen) | -40 °C ... 85 °C (cable, fixed) |
| Widerstand des Leiters (Normen und Spezifikationen) | ≤ For 54.4 Ω/km |
| Die Zugfestigkeit von GFK (Normen und Spezifikationen) | ≤ 60 N (short-term) |
| Material Isolationsleiter (Normen und Spezifikationen) | PE cell |
| Prüfspannung Leiter/Schirm (Normen und Spezifikationen) | 1000 V AC (50 Hz, 1 min) |
| Prüfspannung Leiter/Leiter (Normen und Spezifikationen) | 1000 V AC (50 Hz, 1 min) |
| Attenuation paradiafónica (NEXT) (Standards and specifications) | 76 dB (1 MHz) |
| Entflammbarkeitsklasse gemäß UL 94 (Nennwerte 2 Kopf) | V0 |
| Brandschutz in Schienenfahrzeugen (Normen und Spezifikationen) | BS 6853 (internal Cable Ia, Ib, II / external cable Ia, Ib, II) |
| Aufbau des Treibersignalkabels (Normen und Spezifikationen) | 7x 0.25 mm |
| Durchmesser der Leiter, einschließlich Isolierung (Normen und Spezifikationen) | 1.4 mm ±0.1 mm |
| Mindestbiegeradius, fest vorgegeben (Normen und Spezifikationen) | 5 x D |
| Minimaler Biegeradius, flexibel angeordnet (Normen und Spezifikationen) | 6 x D |
| Dämpfung paradiafonische mit nummerierter Leistung (PSNEXT) (Standards und Spezifikationen) | 73 dB (with 1 MHz) |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung