Vorrätig Top‑Produkt
MCDS18125
MCDS18125 ELDON Floor standing, 1800x1200x500
$0.00USD
4822 auf Lager
Wichtige Spezifikationen
Funktionsname:Feature Value
Tiefe (EF000049):None mm
Breite (EF000008):None mm
Farbe (EF000007):
Lieferanteninformation
ELDON
Produkte: 4827
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Funktionsname | Feature Value |
| Tiefe (EF000049) | None mm |
| Breite (EF000008) | None mm |
| Farbe (EF000007) | |
| Höhe (EF000040) | None mm |
| Vorteil: (Funktionen) | Large enclosure configurations can be created and installed in areas where there is limited access space. The enclosure's doors can support heavy loads, such as, cooling units, due to its increased loading capability. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Stainless steel enclosures can be installed in almost any environment, grade dependent. |
| Kommentar: (Funktionen) | Stainless steel side panels, SPMS, need to be ordered separately, to close individual enclosures and enclosure assembly's, to ensure the stated protection degree is achieved. |
| Funktion: (Funktionen) | Stainless steel 304 and 316(L) double door combinable floor standing enclosures, with a IP 55 protection degree. |
| Material (EF002169) | |
| Kouplable (EF001229) | |
| Vorteil: (Merkmale) | A flexible solution that allows customers to create enclosure configurations made up of smaller individual enclosures. The space required immediately in front of the enclosure is reduced due to the width of each enclosure door being half that of the enclosure. This also results in the door's loading capacity being higher, as it is split over two doors. The installed components inside the enclosure will be safe and secure due to the high protection degree. |
| RAL-Nummer (EF000116) | |
| Tür: (Technische Daten) | Mounted with four hinges. Including door frame with 25 mm hole pattern. Doors cannot be reversed. Separate doors to be ordered for left hand door locking. |
| EMV-Version (EF001062) | |
| Schloss: (Technische Daten) | Espagnolette 4-point locking system in the main door and 2-point locking system in the slave door. Standard double-bit lock with 3 mm insert. Standard inserts, cylinders, lift handles and T-handle are available as accessories. |
| Eckmodell (EF020814) | |
| Rahmen: (Technische Daten) | Seam welded reversed open profiles with 25 mm hole pattern, according to DIN 43660. |
| Freistehend (EF020363) | |
| Schrägdach (EF009278) | |
| Ausführung: (Technische Daten) | 400 pre-grained stainless steel. |
| Stangenbefestigung (EF009582) | |
| Mit Hecktür (EF007381) | |
| Lieferung: (Technische Daten) | Frame with fitted doors, rear panel, roof panel, bottom plates, mounting plate and door frame. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow baying without removal. Packing material is recyclable. |
| Erdung: (Technische Daten) | All panels are earthed through their fittings and are equipped with a separate earthing stud. |
| Schlagfestigkeit (EF004293) | |
| Material: (Technische Daten) | AISI 304L pre-grained stainless steel / AISI 316L. Frame: 1.5 mm. Door: 2 mm. Rear, roof and side panels: 1.5 mm. Bottom plates: 1.5 mm stainless steel. Mounting plate: 3 mm galvanized steel. |
| Anzahl der Türen (EF000122) | |
| Anzahl der Schlösser (EF000123) | |
| Materialqualität (EF001257) | |
| Mit Glastür (EF001089) | |
| Schutz: (Technische Daten) | Complies with IP 55 TYPE 12, 13 IK 10. |
| Rückseite: (Technische Daten) | Fitted by M6 torx screws. Standard facilities for rear door mounting. Split rear panels in 1600 mm wide enclosures. |
| Dachpaneel: (Technische Daten) | Removable. |
| Oberflächenveredelung (EF006569) | |
| Seitenwände: (Technische Daten) | Supplied as an accessory. |
| Mit Montageplatte (EF000118) | |
| Bodenplatten: (Technische Daten) | Two piece bottom plate in 1200 mm width, with injected polyurethane gasket to ensure maximum sealing. |
| Zwischenmontage (EF022994) | |
| Montageplatte: (Technische Daten) | Double folded and adjustable in depth by steps of 25 mm, with the MPD02 accessory. Mounting plate is delivered, attached on the outside of the enclosure packaging. |
| Mit Lüftungstür (EF006279) | |
| Schutzart (IP) (EF005474) | |
| Standwandmodell (EF015208) | |
| Geeignet für den Wandeinbau (EF007536) | |
| Geeignet zur Wandmontage (EF000664) | |
| Schutzart (NEMA) (EF011959) | |
| Montageanforderungen: (Technische Daten) | Standard delivery ready for combined installation. For stand-alone installation, add side panels. |
| Geeignet für metrische Montage (EF005823) | |
| Montageplatte tiefenverstellbar (EF006054) | |
| Maximal zulässige Belastung der Tür(en) gemäß IEC 62208 (EF014988) | None N |
| Maximal zulässige Belastung des Gehäuses gemäß IEC 62208 (EF014987) | None N |
| Thermische Ableitung (Delta T = 20 K) gemäß IEC/TR 60890 (EF014986) | None W |
| Maximal zulässige Belastung der Montageplatte gemäß IEC 62208 (EF014989) | None N |
Produktbeschreibung
Self-supporting, 1800x1200x500, combinable, 2-door, with MP, stainless 304, IP55
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Technische Details
Material:
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
