Vorrätig Top‑Produkt
LS-501
LS-501 PANASONIC Laser Amplifier (with display), connector type, 2 outputs NPN
$0.00USD
4022 auf Lager
Wichtige Spezifikationen
Artikel:Specifications
Kabel:-
Gewicht:Net weight: 15 g approx.Gross weight: 55 g approx.
Details:Amplifiers(Connector type)
Lieferanteninformation
PANASONIC
Produkte: 4316
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Kabel | - |
| Gewicht | Net weight: 15 g approx.Gross weight: 55 g approx. |
| Details | Amplifiers(Connector type) |
| Produkt | Amplifier-separated Type Digital Laser Sensor |
| Material | Enclosure: PolycarbonateCover: PolycarbonateSwitch: Polyacetal |
| Zubehör | FX-MB1 (Amplifier protective seal): 1 set |
| Schutz | IP40(IEC) |
| Teilenummer | LS-501 |
| Produktname | Amplifier-separated Type Digital Laser Sensor LS-500 |
| Ansprechzeit | H-SP: 60 micro s or less, FAST: 150 micro s or less, STD: 250 micro s or less, LONG: 500 micro s or less, U-LG: 5 ms or less, HYPR: 24 ms or less selectable |
| Externer Eingang | NPN non-contact input- Signal condition High: +8 V to +V DC or open, Low: 0 to +2 V DC (source current 0.5 mA or less)- Input impedance: 10 kOhm approx.(Note：Select either sensing output 2 or external input.) |
| Produktnummer | LS-501 |
| Versorgungsspannung | 12 to 24 V DC +10-15% Ripple P-P 10 % or less |
| Timerfunktion | OFF-delay timer, ON-delay timer, ONE-SHOT timer, ON / OFF-delay timer, ON-delay / ONE-SHOT timer,switchable either effective of ineffective, with variable timer periodOFF-delay timer, ON-delay timer, ONE-SHOT timer,switchable either effective of ineffective, with variable timer period |
| Kabelverlängerung | Extension up to total 100 m 328.084 ft is possible with 0.3mm2, or more, cable. |
| Digitalanzeige | 8-digit 7-segment digital display (4-digit green LED + 4-digit red LED), MODE indicator (Yellow LED): L/D, CUST, PRO |
| Umgebungsfeuchtigkeit | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Stoßfestigkeit | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each |
| Logische Operation | Between sensing output 1 and calculation target: Disabled / and / or / xor, selectableCalculation target: Sensing output 2 / adjacent upstream amplifier (sensing output 1) / external input, selectable |
| Stromverbrauch | Normal operation: 1,200 mW or less (Current consumption 50 mA or less at 24 V supply voltage)ECO mode: 980 mW or less (Current consumption 40 mA or less at 24 V supply voltage) |
| Umgebungstemperatur | -10 to +55degrees + 14 to 131 degrees Fahrenheit (If 4 to 7 units are mounted close together, -10 to +50 degrees +14 to +122 degrees Fahrenheit ; if 8 to 16 units are mounted close together, -10 to +45 degrees +14 to +113 degrees Fahrenheit )(No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Betriebsanzeige | Orange LED (lights up when sensing output 1 or sensing output 2 is ON) |
| Empfindlichkeitseinstellung | 2-level teaching / limit teaching / full auto teaching / manual adjustment |
| Timer-Funktion: Zeit | Timer range '' ms'': 0.5 ms approx., 1 to 9,999 ms approx., in approx. 1 ms intervalsTimer range '' sec'': 0.5 sec. approx., 1 to 32 sec. approx., in approx. 1 sec. intervalsTimer range '' 1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., in approx. 0.1 ms intervals, Set separately for each output. |
| Vibrationsfestigkeit | 10 to 150 Hz frequency, 0.75 mm 0.030 in (max. 10 G) amplitude in X, Y and Z directions for two hours each |
| Isolationswiderstand | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Aktuellen Ausgang überwachen | - |
| Externe Eingangsfunktion | Laser emission halt / teaching (full-auto teaching, limit teaching, 2 point teaching) / logic operation setting / copy lock /display adjustment / data bank load / data bank save, selectable |
| Ausgangsauswahlanzeige | Yellow LED (lights up when output is selected) |
| Laseremissionsanzeige | Green LED (lights up during laser emission) |
| Spannungsfestigkeit | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Einhaltung der CE-Kennzeichnungsrichtlinie | EMC Directive, RoHS Directive |
| Anzeigebereich für einfallendes Licht | H-SP/FAST/STD: 0 to 4,000LONG/U-LG/HYPR: 0 to 9,999 |
| Sensorausgänge (Sensorausgang 1, 2) | NPN open-collector transistor・Maximum sink current: 50 mA (Note：25 mA if 5 or more amplifier are connected in cascade (excluding cable extension).)・Applied voltage: 30 V DC or less (between output and 0 V)・Residual voltage: 2 V or less (at max. sink current)(Note：Select either sensing output 2 or external input as the connector type.) |
| Sensorausgangseinstellung: Sensorausgang 1 | Normal mode, differential mode, hysteresis mode, window comparator mode, selectable |
| Sensorausgangseinstellung: Sensorausgang 2 | Normal mode, differential mode, hysteresis mode, self-diagnostic output mode, selectable(Note：Select either sensing output 2 or external input.) |
| Automatische Störungsunterdrückungsfunktion | Incorporated(Note：Number of units that can be mounted close together: 0 for H-SP; 2 for FAST; 4 for STD, LONG, U-LG, or HYPR) |
| Sensorausgänge (Sensorausgang 1, 2): Ausgabefunktion | Selectable either Light-ON or Dark-ON |
| Sensorausgänge (Sensorausgang 1, 2): Kurzschlussschutz | Incorporated |
Produktbeschreibung
More details
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
