Vorrätig Top‑Produkt
LCM-40UDA
LCM-40UDA MEANWELL AC-DC Multi-Stage LED driver Constant Current (CC), Modular output 0.35A/0.5A/0.6A/0.7A/0..
$0.00USD
4376 auf Lager
Wichtige Spezifikationen
Name:LCM-40UDA
Leistung:35W
Zustand:New
Format:Box
Lieferanteninformation
MEANWELL
Produkte: 6448
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Name | LCM-40UDA |
| Leistung | 35W |
| Zustand | New |
| Format | Box |
| Serie | LCM-40UDA |
| Dimmen | DALI, Push-button |
| Genehmigungen | UL |
| Leistung (W) | 35,00 |
| Subformato | IP20 |
| Breite (mm) | 81.50 |
| Höhe (mm) | 23.00 |
| AC-Eingangsleistung Max. | 132,00 |
| Mindesteingangsleistung (AC): Mindestens | 90,00 |
| Anwendungen | Lighting |
| Hersteller | MEAN WELL |
| Produktart | LED Driver |
| Isolation (V) | 3.750,00 |
| Ausgangsstrom | 350mA |
| Spitzenleistung (W) | Thirty five |
| Eingangsanschluss | Quick Connector |
| Eingangsfrequenz | 50 Hz, 60 Hz |
| Lang/Hintergrund | 123.50 |
| Lange Beschreibung | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in plastic boxIP20.Input range90-132Vca47-63Hz.Current output selectable by micro-switch350, 500, 600, 700, 900 or 1050mA.Output current350mA500mA600mA700mA900mA1050mAPower35W35W35W35W35W35WRange of Output Voltage2-100Vcc2-70Vcc2-59Vcc2-50Vcc2-39Vcc2-34VccEfficiency typical:87,5%.Regulation DALI0% to 100% of the intensity of output or push-button (PUSH-DALI). Certificate to DALI.We can regulate by push-button by connecting the input line cord to a push-button normally open and then to the Push (up-regulation in primary). You can connect any number of drivers LCM-GIVES the same push-button.Synchronization: we can sync up10 unitsvia the wires LCM-xxx-SYNC25 in such a way that by regulating a source other do the same regulation without the need to be connected to the bus DALI or push-button. We also make sure that if we use dimming by push button fonts are not desincronizarán.Input class II without grounding.Factor corrector, power>0.98to 115vac at full load.Operating temperature range of caseTcfrom-30ºCup+90ºC.Dimensions (Length x Width x Height):123,5 x to 81.5 x 23mm.3 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.Be sure to adjust the output current desired using the selector current.For more information please see the datasheet in the section attachments.Input for protection by temperature of the LED modules. The driver has an input to connect a NTC sensor (resistance of a negative coefficient) which allows us to reduce the output current in case of excess of temperature in the LED modules. If we're not going to use this input protection, we can use it to connect a fixed resistor and adjust the output current to values lower intermediate up to 56% lower than the value selected with the DIP-Switch. For example if we want a current of 630mA we can adjust the output with the jumpers to 700mA and connect a resistor of 34kOhmnios. In this model, the maximum output current can also be set by using commands DALI. If we set the maximum value of output at 90% even though the command DALI shows 100% will give us only 90% (if it is set to 700mA will give us 630mA) and we can still use the input NTC to protect the LED modules. For more information please see the datasheet in the tab "Attachments" and you can use the Excel file to calculate the value of the resistance.With plastic housing, designed for applications of LED lighting and architectural. Suitable for indoor lighting, offices, LED panels.Low ripple current, no flicker (flicker-free).Compatible with any system DALI. |
| Ausgangsanschluss | Quick Connector |
| Art des Eintrags CA | Single-phase |
| Garantie (Jahre) | 3,00 |
| Ursprungsland | China |
| Ausgangsstrom mA | 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1050 |
| Ausgangsspannungsbereich | 2-100Vcc |
| Intensität der minimalen Ausgangsleistung (mA) | 350,00 |
| Maximale Ausgangsintensität (mA) | 1.050,00 |
Produktbeschreibung
More details
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Technische Details
LED driver dimmable.
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
