Servicezeiten: Montag bis Freitag 9:00-18:00
IB IL 24 PSDO 8-PAC - IB IL 24 PSDO 8-PAC 2985631 PHOENIX CONTACT Safety-oriented digital output module, IP20 degree of protection..
Vorrätig Top‑Produkt

IB IL 24 PSDO 8-PAC

IB IL 24 PSDO 8-PAC 2985631 PHOENIX CONTACT Safety-oriented digital output module, IP20 degree of protection..

$0.00USD
4928 auf Lager
Wichtige Spezifikationen
:2, 3, 4-wire
Tiefe:71.5 mm
Breite:48.8 mm
Höhe:119.8 mm
Lieferanteninformation
Produkte: 0
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support

Technische Spezifikationen

ParameterWert
2, 3, 4-wire
Tiefe71.5 mm
Breite48.8 mm
Höhe119.8 mm
Nettogewicht245.6 g
BezeichnungInline local bus
AusgabenameDigital outputs
MontageartDIN rail
Ausgangsstrommax. 6 A (Total current of all outputs, -25 °C ... 50 °C)
Ausgangsspannung24 V DC (US- 1 V)
Versorgungsspannung24 V DC (via voltage jumper)
FeldbussystemINTERBUS
VerbindungsmethodeInline data jumper
Anzahl der Ausgänge4 (with two-channel assignment)
Nennlast, Lampesee safety data
Hinweis zu den AbmessungenHousing dimensions
SchutzschaltungOverload protection, short-circuit protection of outputs
Getriebegeschwindigkeit500 kBit/ / 2 MBit/s (can be switched)
Aktueller Verbrauchmax. 230 mA (from the local bus)
Nennlast, ohmschsee safety data
SchutzgradIP20
DiagnosemeldungenShort-circuit / overload of the digital outputs Error message in diagnostics code (bus) and display by means of the LED on the motor
Versorgungsspannungsbereich19.2 V DC ... 30 V DC
Hauptstromkreisversorgung UM24 V DC
Nennausgangsspannung24 V DC
Kommunikationsstrom UL7.5 V (via voltage jumper)
Nennlast, induktivsee safety data
Versorgungsspannungsbereich µM19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Luftdruck (Betrieb)80 kPa ... 108 kPa (up to 2000 m above sea level)
Aktueller Verbrauch laut ULmax. 230 mA (see safety data)
Aktueller Verbrauch von UMtyp. 30 mA (all outputs set including actuator current)
Hinweis zu den Gewichtsspezifikationenwith connectors
Umgebungstemperatur (Betrieb)-25 °C ... 55 °C
Luftdruck (Lagerung/Transport)66 kPa ... 108 kPa (up to 3500 m above mean sea level)
Kategorie gemäß EN 13849-14
Maximaler Ausgangsstrom pro Gruppe3 A
Zulässige Luftfeuchtigkeit (Betrieb)10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.)
Maximaler Ausgangsstrom pro Modul3 A (See technical data)
Maximaler Ausgangsstrom pro Kanal2 A
Umgebungstemperatur (Lagerung/Transport)-25 °C ... 70 °C
Zulässige Luftfeuchtigkeit (Lagerung/Transport)10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.)

Produktbeschreibung

Safety-oriented, IP20-rated digital output module for SafetyBridge, INTERBUS-Safety and PROFIsafe systems. The module has 4 secure digital outputs with two-channel occupancy or 8 secure digital output
Hauptmerkmale
  • Qualität in Industrieklasse
  • RoHS-konform
  • CE-zertifiziert
  • 1‑Jahresgarantie

Technische Details

The safety module is an output module from the Inline product range, designed for use in an INTERBUS-Safety or PROFIsafe system. The safety module can be used as part of an Inline station at any point within an INTERBUS-Safety or PROFIsafe Inline system. The transmission speed of the safety module can be set to 500 kbaud or 2 Mbaud using a switch. Only one transmission speed must be used uniformly within a station. The module has four safe digital outputs for two-channel assignment or eight safe digital outputs for single-channel assignment. The outputs can be parameterized according to the application and enable the integration of actuators in the safe INTERBUS system (INTERBUS-Safety) and in the PROFIsafe system. Depending on the installation and parameterization, in these systems the safety module can achieve the following safety integrity:

Produktdokumente

Datenblatt

Technische Spezifikationen und Leistungsdaten

Benutzerhandbuch

Installations- und Betriebsanleitung

Top