G38001036230

Dupline® Data LoggerTypes G 3800 0036, G 3800 1036Duline®FieldbusInstallationbusProduct DescriptionProgrammablechannelalarm monitoring and analog• Programmable channel generator with optional built-in GSM Modem• Event and time based data logging functions for digital, analog and counter values• Log Records are sent to the central Dupline-Online Webserver via GSM Modem or the Internet• User access to real-time and historical Dupline-Online data via the Internet• Export of files with logged data via the internet• Real-time, timer and logic functions• Analog set-point control and monitoring• Light and Rollerblind control functions• Alarm Monitoring• Option for Radio controlled clock for high real time accuracy• User-friendly configuration via Windows 98/2000/NT/XPsoftware• 2 x RS232 ports for configuration and Dupline data read/write• 1 x RS485 port for networking of up to 32 Data Loggers• Modbus-RTU protocol• Built-in software driver for external radio modem• 4 digital inputs / 4 digital outputs on-board• H8-housing for DIN-rail mounting (EN50022)• AC or DC power supplygenerator with built-in event and time based logging functions for digital, analog and counter values. Log Records can be sent to the central Dupline-Online Web- serverviabuilt-inGSMset-point control. In addition to that, thereisrealtime, timer and logic functions. Programmingiseasily per- formed through Windows- based configuration soft- ware.Upto32DataLog-Ordering KeyType: Dupline® H8-housing GSM phone Data LoggerG 3800 1036 230modem (optional) or the Internet.Userscanaccess real-time and historical logged data via the Internet as alarm buffers, trend curves, bargraphs or as comma separated files. The Data Logger also contains intelligent functionsfor light androllerblindcontrol,gers can be networked as slaves in a RS485 network using the Modbusprotocol. The unit has 4 digital inputs and4digitaloutputs onboard,and itis possible to create links to other Dupline networks via external Radio Modem.SupplyType SelectionSupplyOrdering no.Ordering no.w. GSM telephone115/230 VACG 3800 0036 230G 3800 1036 23010-30 VDCG 3800 0036 800G 3800 1036 800Input/Output SpecificationsSerial PortRS 232COM 1115 kBaudCOM 29600 Baud, adjustableData format 8 bitCOM 1, COM 2 No parity, 1 stop bit9-pole female SUB-D Pin assignmentTxDPin 2RxDPin 3GNDPin 5Dielectric voltageCom.port - Dupline® ≥ 2 kVAC (rms) Protocol Modbus-RTURS 485 TerminationPin 27When in use, connect to pin 31Fs-BPin 28When in use, connect to pin 30Fs-APin 29When in use, connect to pin 31+ (B) Pin 30- (A) Pin 31Sequence time32 channels / 128 channels 38.6 ms / 132.3 msDigital outputs 4 PNP transistors FunctionProgrammable Output voltage VDD ≤ 35 VDCOutput current≤ 100 mA Output voltage drop ≤ 2 VOff-state leakage current≤ 100 µA Short-circuit protection None Built-in protective diodes None Dielectric voltageOutput - Dupline® ≥ 4 kVAC (rms) Output - Input 200 VInductive loads External noise suppression requiredInputsDigital 6 - 30 VDCVoltage ON > 5.5 V OFF < 1.5 V Current≤ 6 mADielectric voltage®GNDPin 32V+Pin 33*)Input - DuplineGSM Modem≥ 4 kVACProtocolModbus-RTUDupline® OutputDupline® carrierOutput voltage8.2 V Current< 130 mA Short-circuit protection YesSiemens cellular engine TC35Dual Band EGSM900 and GSM1800Output power Class 4 (2 W) EGSM900Class 1 (1 W) GSM1800Antenna connector FME*)V+ and GND may be used as supply for digital I/O’s, if RS 485 is not used.Specifications are subject to change without notice (01.09.2008) 1Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group