G34960000700

Dupline® Master ModuleInterface forStandard Optolink ProtocolType G 3496 0000• Standard Optolink Protocol Slave• Built-in normal Dupline®Channel Generator• 128 I/O’s and DC power supply on 3 wires• RS232/RS422/RS485 port for interfacing to control system• Multidropping of up to 16 devices on RS485• LED-indications for supply, Dupline®carrier and Com- port TX• Galvanically isolated Com-port supplied by internalDC/DC converterProduct DescriptionOrdering KeyG 3496 0000 700G 3496 0000 is designed as a cost-effectivesolution for interfacing Dupline® I/O’s to control systems. It performs three functions: Dupline®channel generator, power supply synchronization (enables 3-wire system with supply) and RS232/RS422/ RS485 interface.Type: Dupline® H4-Housing Combined module Interface typeDC supplyType SelectionSupplyPLC Interface type Ordering no.20-30 VDCOptolink Standard protocolG 3496 0000 700Input/Output SpecificationsPower outputOutput voltage20-30 VDC (pulsating)Output current< 3.0 A @ 50ºCShort circuit protection 4 A quick acting fuseOutput voltage drop < 1.0 VDupline®carrierOutput voltage8.2 V (pulsating)Current < 60 mAShort circuit protection YesScan time128 channels132.2 ms64 channels 69.8 msCommunication portStandard RS 232/RS 422/ RS 485Split I/O / Normal mode Normal modeInput/Output Specifications (Cont.)Pin assignment2-wire RS 485S/R Data line + (B)Pin 3S/R Data line - (A) Pin 8GND Pin 54-wire RS 485/RS 422R Data line + (B)Pin 3R Data line - (A) Pin 8S Data line + (B)Pin 2S Data line - (A) Pin 7Direction Pin 4(Connect to GND pin 5when using 4-wirecommunication)RS 232Connection 9 pole female SUB-D Dielectric voltageCom-port - Dupline® 1 kVAC (rms) ProtocolOptolink Baud rate19200Data bits 8Start bit 1Stop bit 1TXPin 1RXPin 9GND Pin 5Supply Specifications* Note see wir-ing diagrams forPC-connectionParityNoneFlow-controlNonePower supplyOvervoltage cat. III (IEC 60664)Operational voltage (Vin) 20-30 VDC Reverse polarity protectionNoneCurrent consumption< 150 mA + Power loadPower dissipation < 5 W Transient protection voltage800 V Dielectric voltageSupply - Dupline® NoneSupply - com-port1 kVAC (rms)Note: Use individual power supplies for all G349600xx700, as the input are not galvanic isolated from each other.Specifications are subject to change without notice (02.12.2014)1