


| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Ausgabe | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.0 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Details | General purpose |
| Produkt | Leak Detection Sensor |
| Material | Enclosure: Polypropylene |
| Schutz | IP67 (IEC) |
| Teilenummer | EX-F72-C5 |
| Produktname | Leak Detection Sensor EX-F70/EX-F60 |
| Ansprechzeit | 50 ms or less |
| Produktnummer | EX-F72-C5 |
| Erfassungsobjekt | Water, Fluorinert™Note:Highly viscous liquid may not be detected stably.Note:Fluorinert is the world wide trademark of 3M. |
| Versorgungsspannung | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Kabelverlängerung | Extension up to total 50 m164.042 ft |
| Fehleranzeige | Red LED (lights up when the leak liquid is detected, or the sensor is mounted improperly) |
| Umgebungsfeuchtigkeit | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Emitterelement | Infrared LED (non-modulated) |
| NORMAL-Indikator | Green LED (lights up when the sensor is mounted properly) |
| Umgebungsbeleuchtungsstärke | Incandescent light: 1,000 ℓx or less at the light-receiving face |
| Umgebungstemperatur | -10 to +60 ℃+14 to +140 ℉(No dew condensation or icing allowed), Storage: -20 to +70 ℃- 4 to +158 ℉Note : Liquid being detected should also be kept within the rated ambient temperature range. |
| Aktueller Verbrauch | 10 mA or less(PNP output type: 15 mA or less) |
| Ausgabe: Ausgabeoperation | In normal state: ON, When leak detected or the sensor is mounted improperly: OFF |
| Ausgang: Kurzschlussschutz | Incorporated |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung