

| Parameter | Wert |
|---|---|
| 18 V DC ... 32 V DC | |
| Sicherung | electronic |
| Notiz | No. 14 |
| Typ | DIN rail module, one-piece |
| Farbe | black (RAL 9005) |
| Tiefe | 80 mm |
| Breite | 12.5 mm |
| Höhe | 83 mm |
| Allgemein | When mounted in rows without convection cooling, the nominal device current should only be led to a maximum of 80% due to the thermal effect during continuous operation (100% operating factor).Special precautionary measures must be taken in systems or machines, to prevent components from restarting (e.g., use of a safety PLC).Parallel connection of multiple circuit breakers is not permitted. |
| Stromspannung | < 3 V DC (Low state) |
| Sicherungstyp | Automatic device |
| Ausschalten | typ. 1.8 x IN |
| Produktart | Device circuit breakers |
| Impulslänge | min. 10 ms |
| Schraubengewinde | M4 |
| Spannungsabfall | 80 mV (at IN) |
| Feuchtigkeitstest | 96 h, 95 % RH, 40 °C |
| Eingangsspannung | max. 32 V DC |
| Montageart | DIN rail: 35 mm |
| Ausgangsstrom | max. 0.2 A (Short-circuit-proof) |
| Ausgangsspannung | 24 V DC |
| Produktfamilie | EC-E |
| Verbindungsname | Auxiliary contact |
| Höhe NS 35/15 | 90.5 mm |
| Anzahl der Kanäle | 1 |
| Einschaltverzögerung | typ. 0.5 s |
| Auslösemethode | E (electronic) |
| Artikelüberarbeitung | 02 |
| Höhe NS 35/7,5 | 83 mm |
| Abstreiflänge | 10 mm |
| Verbindungsmethode | Screw connection |
| Querschnitt AWG | 26 ... 6 (converted acc. to IEC) |
| Betriebsspannung | 24 V DC |
| Anzugsmoment | ... 1.2 Nm |
| Nennstrom IN | 1 A |
| Schaltfunktion | Reset input |
| Aktueller Verbrauch | typ. 2.6 mA (at 24 V DC) |
| Verschmutzungsgrad | 2 |
| Durchschlagsfestigkeit | max. 32 V DC (Load circuit) |
| Anzahl der Positionen | 1 |
| Bemessungsstoßspannung | 0.5 kV |
| Schutzgrad | IP20 (Housing) |
| Maximale kapazitive Last | 20000 µF |
| Erforderliche Ersatzsicherung | not required, integrated failsafe element |
| Nennquerschnitt | 16.00 mm² |
| Schaltkapazität ICN | Active current limitation |
| Normen/Spezifikationen | UL 508 |
| Aktive Strombegrenzung | active |
| MTBF (IEC 61709, SN 29500) | 7430000 h (at 25 °C with 80 % load) |
| Leiterquerschnitt AWG | 20 ... 6 |
| Leiterquerschnitt starr | 0.5 mm² ... 16 mm² |
| Umgebungstemperatur (Betrieb) | 0 °C ... 50 °C (non-condensing) |
| Kurzschlussstrombereich I0 | typ. 25 mA ±5 mA (When switched on) |
| Leiterquerschnitt flexibel | 0.5 mm² ... 16 mm² |
| Brennbarkeitsklasse gemäß UL 94 | V0 |
| Umgebungstemperatur (Lagerung/Transport) | -20 °C ... 70 °C |
| Leiterquerschnitt, flexibel [AWG] | 20 ... 6 (converted acc. to IEC) |
| 2 Leiter mit gleichem Querschnitt, massiv | 0.5 mm² ... 4 mm² |
| 2 Leiter mit gleichem Querschnitt, flexibel | 0.5 mm² ... 4 mm² |
| 2 Leiter mit gleichem Querschnitt AWG starr | 20 ... 12 (converted acc. to IEC) |
| 2 Leiter mit gleichem Querschnitt AWG flexibel | 20 ... 12 (converted acc. to IEC) |
| Querschnitt des flexiblen Leiters (Aderendhülse mit Kunststoffhülse) | 0.5 mm² ... 10 mm² |
| Leiterquerschnitt flexibel (Aderendhülse ohne Kunststoffhülse) | 0.5 mm² ... 10 mm² |
| Leiterquerschnitt, flexibel, mit Aderendhülse, mit Kunststoffhülse | 0.5 mm² ... 10 mm² |
| Leiterquerschnitt flexibel, mit Aderendhülse ohne Kunststoffhülse | 0.5 mm² ... 10 mm² |
| 2 Leiter mit gleichem Querschnitt, flexibel, mit Aderendhülse ohne Kunststoffhülse | 0.5 mm² ... 2.5 mm² |
| 2 Leiter mit gleichem Querschnitt, flexibel, mit Doppel-Aderendhülse und Kunststoffhülse | 0.5 mm² ... 6 mm² |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung