


| Parameter | Wert |
|---|---|
| Fiber amplifierconnector | |
| PNP | 53 µs for operation and 55 µs for reset |
| Artikel | Order code (for pre-wired types with 2 m cable length) |
| Form | Type |
| Funktionen | Power tuning |
| NPN-Ausgang | PNP output |
| PNP-Ausgang | E3X-DAH41-S, E3X-DAH8-S |
| Reaktionszeit | Super-high-speed mode |
| Standardmodus | 1 ms for operation and reset respectively |
| Infrarotlicht | E3X-DAH11-S 2M |
| Timerfunktion | Select from OFF-delay, ON-delay, or one-shot timer. 1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments,200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments) |
| Digitale Anzeigen | Incident level + threshold or user specific |
| Schutzschaltungen | Power supply reverse polarity protection, output short circuit protection, mutual interference prevention |
| Empfindlichkeitseinstellung | Teaching and digital up/down keys |
| Schutzgrad | IEC 60529 IP50 (with protective cover attached) |
| Hochauflösender Modus | 4 ms for operation and reset respectively |
| Versorgungsspannung | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| Lichtquelle (Wellenlänge) | Infrared LED |
| Infrarotlicht (Faserverstärkeranschluss)1 | E3X-DAH6-S |
| 30 cm langes PVC-Kabel mit M8-Stecker (4-polig) | E3X-CN21-M3J-2 0.3M |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung