Vorrätig Top‑Produkt
CX423J
CX423J CX-423-J PANASONIC Diffuse reflective type, 7 20cm, NPN, M12-connector
$0.00USD
3838 auf Lager
Wichtige Spezifikationen
Artikel:Specifications
Ausgabe:NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Details:Diffuse reflective(Narrow-view)
Produkt:Compact Photoelectric Sensor
Lieferanteninformation
PANASONIC
Produkte: 4316
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Ausgabe | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) |
| Details | Diffuse reflective(Narrow-view) |
| Produkt | Compact Photoelectric Sensor |
| Material | Enclosure: PBT (polybutylene terephthalate)Lens: acrylicIndicator cover: acrylic |
| Zubehör | - |
| Hysterese | 15 % or less of operation distance(Note) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 × 200 mm7.874 × 7.874 in) as the object. |
| Schutz | IP67 (IEC) |
| Teilenummer | CX-423-J |
| Produktname | Compact Photoelectric Sensor CX-400 Ver.2 |
| Ansprechzeit | 1 ms or less |
| Erfassungsbereich | 70 to 300 mm2.756 to11.811 in(Note) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 × 200 mm7.874 × 7.874 in) as the object. |
| Produktnummer | CX-423-J |
| Erfassungsobjekt | Opaque, translucent or transparent object(Min. sensing object: Ø0.5 mm Ø0.020 incopper wire)(Note) Make sure to confirm detection with an actual sensor before use. |
| Versorgungsspannung | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Betriebsanzeige | Orange LED(lights up when the output is ON)(incorporated on the receiver for thru-beam type) |
| Umgebungsfeuchtigkeit | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Stoßfestigkeit | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Umgebungsbeleuchtungsstärke | Incandescent light: 3,000 lx or less at the light-receiving face |
| Umgebungstemperatur | - 25 to +55℃-13 to +131℃ ℉(No dew condensation or icing allowed ), Storage: -30 to +70℃-22 to +158℃ ℉ |
| Aktueller Verbrauch | 15 mA or less |
| Stabilitätsindikator | Green LED(lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type) |
| Empfindlichkeitsregler | Continuously variable adjuster(incorporated on the receiver for thru-beam type) |
| Vibrationsfestigkeit | 10 to 500 Hz frequency, 1.5 mm0.059 inamplitude (10 G max.) in X, Y and Z directions for two hours each |
| Isolationswiderstand | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Ausgabe: Ausgabeoperation | Switchable either Light-ON or Dark-ON |
| Spannungsfestigkeit | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Emitter (moduliert) | Red LED |
| Einhaltung der CE-Kennzeichnungsrichtlinie | EMC Directive, RoHS Directive |
| Ausgang: Kurzschlussschutz | Incorporated |
| Automatische Störungsunterdrückungsfunktion | Incorporated(Two units of sensors can be mounted close together.) |
| Wiederholgenauigkeit (senkrecht zur Messachse) | 0.5 mm0.020 inor less |
| Emissionselement (moduliert): Emissionswellenlänge des Maximums | 645 nm0.025 mil |
Produktbeschreibung
More details
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
