Vorrätig Top‑Produkt
CX-491A-P-C05-Y
CX-491A-P-C05-Y PANASONIC Basic Retroreflective, light-ON, 3m, PNP, cable 0,5m, no reflector
$0.00USD
4911 auf Lager
Wichtige Spezifikationen
Artikel:Specifications
Kabel:0.2 mm23-core cabtyre cable, 0.5 m1.640 ftlong
Ausgabe:PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Details:Retroreflective(With polarizing filters)
Lieferanteninformation
PANASONIC
Produkte: 4316
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Kabel | 0.2 mm23-core cabtyre cable, 0.5 m1.640 ftlong |
| Ausgabe | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current) |
| Details | Retroreflective(With polarizing filters) |
| Produkt | Compact Photoelectric Sensor |
| Material | Enclosure: PBT (polybutylene terephthalate)Lens: acrylicIndicator cover: acrylic |
| Hysterese | - |
| Schutz | IP67 (IEC) |
| Teilenummer | CX-491A-P-C05-Y |
| Produktname | Compact Photoelectric Sensor CX-400 Ver.2 |
| Ansprechzeit | 1 ms or less |
| Erfassungsbereich | 3 m9.843 ft(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-230 reflector (optional). The sensing range represents the actual sensing range of the sensor. |
| Produktnummer | CX-491A-P-C05-Y |
| Erfassungsobjekt | Ø50 mmØ1.969 inor more opaque, translucent or specular object(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-230 reflector (optional). The sensing range represents the actual sensing range of the sensor.(Note) Make sure to confirm detection with an actual sensor before use. |
| Versorgungsspannung | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Kabelverlängerung | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Betriebsanzeige | Orange LED(lights up when the output is ON)(incorporated on the receiver for thru-beam type) |
| Umgebungsfeuchtigkeit | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Stoßfestigkeit | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Umgebungsbeleuchtungsstärke | Incandescent light: 3,000 lx or less at the light-receiving face |
| Umgebungstemperatur | - 25 to +55℃-13 to +131℃ ℉(No dew condensation or icing allowed ), Storage: -30 to +70℃-22 to +158℃ ℉ |
| Aktueller Verbrauch | 13 mA or less |
| Stabilitätsindikator | Green LED(lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type) |
| Empfindlichkeitsregler | - |
| Vibrationsfestigkeit | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude (10 G max.) in X, Y and Z directions for two hours each |
| Isolationswiderstand | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Spannungsfestigkeit | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Emitter (moduliert) | Red LED |
| Einhaltung der CE-Kennzeichnungsrichtlinie | EMC Directive, RoHS Directive |
| Ausgang: Kurzschlussschutz | Incorporated |
| Automatische Störungsunterdrückungsfunktion | Incorporated(Two units of sensors can be mounted close together.) |
| Wiederholgenauigkeit (senkrecht zur Messachse) | 0.5 mm0.020 inor less |
| Emissionselement (moduliert): Emissionswellenlänge des Maximums | 680 nm0.027 mil |
Produktbeschreibung
More details
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
