

| Parameter | Wert |
|---|---|
| -10 °C ... 70 °C (flexible installation) | |
| Rot | D-SUB25 (8) = () |
| Notiz | The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end. |
| Blau | D-SUB25 (7) = () |
| grau | D-SUB25 (5) = () |
| Rosa | D-SUB25 (6) = () |
| Tonhöhe | 2.77 mm |
| Schwarz | D-SUB25 (9) = () |
| braun | D-SUB25 (2) = () |
| Grün | D-SUB25 (3) = () |
| Weiß | D-SUB25 (1) = () |
| violett | D-SUB25 (10) = () |
| Gelb | D-SUB25 (4) = () |
| Höhe | ≤ 2000 m |
| Abgeschirmt | yes |
| rot-blau | D-SUB25 (12) = () |
| braunrot | D-SUB25 (24) = () |
| grau-rosa | D-SUB25 (11) = () |
| weiß-rot | D-SUB25 (23) = () |
| Kabeltyp | 25X0.25 [PVC] |
| braun-blau | D-SUB25 (22) = () |
| graubraun | D-SUB25 (18) = () |
| rosabraun | D-SUB25 (20) = () |
| weiß-blau | D-SUB25 (21) = () |
| weißgrau | D-SUB25 (17) = () |
| weiß-rosa | D-SUB25 (19) = () |
| braungrün | D-SUB25 (14) = () |
| weiß-schwarz | D-SUB25 (25) = () |
| weißgrün | D-SUB25 (13) = () |
| Kabellänge | 2 m |
| halogenfrei | no |
| Produktart | System cable |
| Schraubengewinde | UNC 4-40 |
| UL AWM-Stil | 2464/1061 |
| weiß-gelb | D-SUB25 (15) = () |
| gelbbraun | D-SUB25 (16) = () |
| Leitertyp | Assembled shielded round cable |
| AWG-Signalleitung | 24 |
| Artikelüberarbeitung | 02 |
| Kabelwiderstand | ≤ 80 Ω/km (at 20 °C) |
| Flammbeständigkeit | IEC 60332-1-2 (raw cable) |
| Verbindungsmethode | Single wires |
| Beständigkeit gegen Öl | can withstand occasional splashes (raw cable) |
| Anzugsmoment | 0.2 Nm |
| Leitermaterial | Bare Cu litz wires |
| Stromstärke (pro Pfad) | ≤ 2 A (Uncoiled, see derating) |
| Hinweise zum Betrieb | No additional touch protection is required when using a SELV/PELV voltage (≤30 V AC or 60 V DC). |
| Anzahl der Positionen | 25 |
| Schutzgrad | IP20 |
| Isolationswiderstand | ≥ 20 MΩ*km (at 20 °C) |
| Anzahl der Verbindungen | 1 |
| Äußere Hülle, Farbe | gray |
| Nominaler Betriebsmodus | 100% operating factor |
| Betriebsspannung (Wechselstrom) | ≤ 30 V AC |
| Betriebsspannung (DC) | ≤ 60 V DC |
| Äußere Hülle, Material | Semi-rigid PVC |
| Leiterquerschnitt | 25x 0.25 mm² |
| Außendurchmesser des Kabels | 9.80 mm ±0.5 mm |
| Abisolierlänge (Mantel) | 150 mm |
| Einführ-/Entfernungszyklen | > 200 |
| Drahtdurchmesser inkl. Isolierung | 1.2 mm ±0.05 mm |
| Umgebungstemperatur (Betrieb) | -40 °C ... 70 °C (fixed installation) |
| Leiterstruktur-Signalleitung | 14x 0.15 mm |
| Dynamische Tragfähigkeit (Biegung) | Max. bending cycles: 5000 (at a radius of ≥ 15x outside diameter) |
| Anschluss gemäß Standard | IEC 60807-2 |
| Umgebungstemperatur (Lagerung/Transport) | -40 °C ... 80 °C |
| Kleinster Biegeradius, feste Installation | 82 mm |
| Schutzgrad (Installationsort) | ≥ IP54 (Installation location) |
| Kleinster Biegeradius, bewegliche Installation | 155 mm |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung