

| Parameter | Wert |
|---|---|
| 5 V DC | |
| Typ | block modular |
| Tiefe | 54 mm |
| Breite | 35 mm |
| Höhe | 126.1 mm |
| Ausgabename | PWM outputs |
| Aktueller Stromverbrauch | max. 150 mA |
| Produktart | I/O component |
| Montageart | DIN rail mounting |
| Betriebsart | PWM, pulse generator, push-pull output |
| Produktfamilie | Axioline F |
| Versorgungsspannung | 5 V DC (via bus base module) |
| Verbindungsname | Axioline F connector |
| Frequenzbereich | 0 Hz ... 65535 Hz |
| Artikelüberarbeitung | 03 |
| Verschmutzungsgrad | 2 (IEC 60664-1, EN 60664-1) |
| Schutzklasse | III (IEC 61140, EN 61140, VDE 0140-1) |
| Abstreiflänge | 8 mm |
| Verbindungsmethode | Bus base module |
| Montageposition | any (no temperature derating) |
| Anzahl der Ausgänge | 2 |
| Impuls-Tastverhältnis | 0 % ... 100 % |
| Lieferumfang | including bus base module and Axioline F connectors |
| Eingabeadressbereich | 0 Byte |
| Nennstrom IN | max. 500 mA (at 24 V DC) |
| Nennlast, Lampe | max. 6 W (at nominal voltage) |
| Hinweis zu den Abmessungen | The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). |
| Schutzschaltung | Surge protection; electronic (35 V, 0.5 s) |
| Besondere Eigenschaften | Pulse width modulation |
| Getriebegeschwindigkeit | 100 Mbps |
| Maßzeichnung | |
| Nennlast, ohmsch | max. 12 W (at 24 V DC nominal voltage) |
| Hinweis zur Anwendung | Only for industrial use |
| Ausgabeadressbereich | 8 Byte |
| Kurzschlussfest | yes |
| Schutzgrad | IP20 |
| Anzahl der Schnittstellen | 2 |
| Überspannungskategorie | II (IEC 60664-1, EN 60664-1) |
| Versorgungsspannungsbereich | 19.2 V DC ... 30 V DC including all tolerances, including ripple |
| Verbindungstechnologie | 2-conductor |
| Kurzschlussstrom | typ. 2.2 A (for approx. 1.2 µs, auto-retry after approx. 40 µs, 24 V output) |
| Nennausgangsspannung | 24 V (UO- 1.1 V) |
| Nennlast, induktiv | max. 12 VA (at 24 V DC nominal voltage) |
| Erforderliche Parameterdaten | 1 Byte |
| Luftdruck (Betrieb) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Überspannungsschutz | yes |
| Leiterquerschnitt AWG | 24 ... 16 |
| Erforderliche Konfigurationsdaten | 6 Byte |
| Leiterquerschnitt starr | 0.2 mm² ... 1.5 mm² |
| Hinweis zur Verbindungsmethode | Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. |
| Leiterquerschnitt, starr | 0.2 mm² ... 1.5 mm² |
| Umgebungstemperatur (Betrieb) | -25 °C ... 60 °C |
| Luftdruck (Lagerung/Transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Leiterquerschnitt flexibel | 0.2 mm² ... 1.5 mm² |
| Zulässige Luftfeuchtigkeit (Betrieb) | 5 % ... 95 % (non-condensing) |
| Leiterquerschnitt, flexibel | 0.2 mm² ... 1.5 mm² |
| Umgebungstemperatur (Lagerung/Transport) | -40 °C ... 85 °C |
| Zulässige Luftfeuchtigkeit (Lagerung/Transport) | 5 % ... 95 % (non-condensing) |
| Maximale Verlustleistung im Nennbetrieb | 2.05 W |
| Prüfspannung: 24 V Versorgungsspannung (E/A) / Funktionsmasse | 500 V AC, 50 Hz, 1 min. |
| Prüfspannung: 5 V Versorgungsspannung des lokalen Busses (UBus) / Funktionsmasse | 500 V AC, 50 Hz, 1 min. |
| Testspannung: 5 V Versorgungsspannung des lokalen Busses (UBus) / 24 V Versorgungsspannung (I/Os) | 500 V AC, 50 Hz, 1 min. |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung