


| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Produkt | FP7 Temperature input units |
| Teilenummer | AFP7TC8 |
| Produktname | FP7 Temperature input units |
| Produktnummer | AFP7TC8 |
| Umwandlungsgeschwindigkeit | 5 ms/channel + 5 ms (Note)25 ms/channel + 25 msAdd the drift compensation measuring time to the number of measuring channels.(Note) The AC noise removal is disabled. |
| Gesamtgenauigkeit | plus or minus 0.1%F.S.or less(at +25degrees +77degrees Fahrenheit )plus or minus 0.3%F.S.or less(at 0 to +55degrees +32 to +131degrees Fahrenheit ) |
| Verbindungsmethode | Connector type terminal block |
| Anzahl der Kanäle | 8 channels |
| Erkennung von Kabelbrüchen | Available |
| Eingangsimpedanz:Strom | 250 Ohm |
| Eingangsimpedanz: Spannung | 1 MOhm |
| Methode zur Änderung des Eingabebereichs | Selectable per channel |
| Maximal- und Minimalwertspeicher | Selectable for one channel |
| Digitale Verarbeitung: Mittelwertbildung | Cycle, time, moving |
| Digitale Signalverarbeitung: Verstärkungseinstellung | plus or minus 10% |
| Eingangsbereich (Auflösung): Aktuell | 0 to 20 mA (resolution: 1/31,250)4 to 20 mA (resolution: 1/25,000)(Note)Resolution: max. 16 bits(Note) The full scale (F.S.) ranges of accuracy is 0 to 20 mA for current input, respectively. |
| Eingangsbereich (Auflösung): Spannung | -10 to 10V DC (resolution: 1/62,500)0 to 5V DC (resolution: 1/31,250)1 to 5V DC (resolution: 1/25,000)(Note)-100 to 100mV DC (resolution: 1/62,500)Resolution: max. 16 bits(Note) The full scale (F.S.) ranges of accuracy is 1 to 5 V DC for current input, respectively. |
| Digitale Verarbeitung: Offset-Einstellung | Any value within plus or minus 3,000 |
| Isolationsmethode: Zwischen den Kanälen | PhotoMOS relay |
| Genauigkeit der Referenzkontaktkompensation | plus or minus 1.0degrees (with thermocouple input) |
| Vergleich der oberen und unteren Grenzwerte | Selectable for one channel |
| Digitale Verarbeitung: Skalenumrechnungseinstellung | Any value within plus or minus 30,000 (Voltage and current range only) |
| Konvertierungsausführungs-/Nichtausführungskanal-Einstellung | Selectable per channel unit |
| Eingangsbereich (Auflösung): Thermoelement (Auflösung: 0,1℃) | K1: -100.0 to 600.0degrees / K2: -200.0 to 1000.0degreesJ1: -100.0 to 400.0degrees / J2: -200.0 to 750.0degreesT: -270.0 to 400.0degrees / N: -270.0 to 1300.0degreesR: 0.0 to 1760.0degrees / S: 0.0 to 1760.0degreesB: 0.0 to 1820.0degrees / E: -270.0 to 1000.0degreesPLII: 0.0 to 1390.0degrees / WRe5-26: 0.0 to 2315.0degrees |
| Isolationsmethode: Zwischen den Eingangsklemmen und dem internen Schaltkreis | Photocoupler and isolated DC/DC converter |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung