Vorrätig Top‑Produkt
AFP0HCCS2
AFP0HCCS2 PANASONIC Communication cassette with 2 x RS232C (2x3 pin)
$0.00USD
4758 auf Lager
Wichtige Spezifikationen
Artikel:Specifications
Bemerkung:Notes:1) The start and end codes can be used only for general-purpose serial communications.2) The unit No. (station number) can be selected at system register.3) Sufficient noise tolerance is provided but it is recommended that a user program be created for retransmission. (To improve the reliability of communications when a communication error occurs due to an excessive noise or when the target device cannot receive data temporarily.)4) When connecting a commercially available device that has an RS-485 interface, please confirm operation using the actual device. In some cases, the number of station units, transmission distance and communication speed vary depending on the connected device.5) The transmission distance, transmission speed, and number of stations should be within the range of the graph below, depending on each value.When the transmission speed is 19,200 bits/s, you can set up to 99 stations and up to 1,200 m3,937.008 fttransmission distance.
Schnittstelle:RS-232C 2 channels
Nettogewicht:10 g approx.
Lieferanteninformation
PANASONIC
Produkte: 4316
Versand in der Regel innerhalb von 2-3 Werktagen
Qualität garantiert
Schneller Versand
Technischer Support
Technische Spezifikationen
| Parameter | Wert |
|---|---|
| Artikel | Specifications |
| Bemerkung | Notes:1) The start and end codes can be used only for general-purpose serial communications.2) The unit No. (station number) can be selected at system register.3) Sufficient noise tolerance is provided but it is recommended that a user program be created for retransmission. (To improve the reliability of communications when a communication error occurs due to an excessive noise or when the target device cannot receive data temporarily.)4) When connecting a commercially available device that has an RS-485 interface, please confirm operation using the actual device. In some cases, the number of station units, transmission distance and communication speed vary depending on the connected device.5) The transmission distance, transmission speed, and number of stations should be within the range of the graph below, depending on each value.When the transmission speed is 19,200 bits/s, you can set up to 99 stations and up to 1,200 m3,937.008 fttransmission distance. |
| Schnittstelle | RS-232C 2 channels |
| Nettogewicht | 10 g approx. |
| Teilenummer | AFP0HCCS2 |
| Produktname | FP0H communication cassettes |
| Produktnummer | AFP0HCCS2 |
| Anzahl der Stationen | - |
| Synchrone Methode | Start-stop synchronization system |
| Kommunikationsgeschwindigkeit | 1,200(Note), 2,400(Note), 4,800, 9,600, 19,200, 38,400, 57,600, 115,200, 230,400 bits/sec.(Note): System register no. 415 cannot be used to set the baud rate to 1,200 bps. To set the baud rate to 1,200 bps, use the SYS1 instruction. If the baud rate of any of the COM ports is 2,400 bps or lower, F-ROM access will slow down.Example) F12(ICRD) instruction, P13(ICWT) instruction, etc. |
| Kommunikationsmethode | Half-duplex system |
| Übertragungsdistanz | Max. 15 m49.213 ft |
| Datenübertragungsauftrag | Transmit from bit 0 in character units. |
| Kommunikationskonfiguration | 1 : 1 communication |
| Übertragungsformat: Parität | none / odd / even |
| Übertragungsformat: Endcode | CR / CR + LF / none / ETX / Time (0 to 100 ms) |
| Übertragungsformat: Stoppbit | 1 bit / 2 bits |
| Übertragungsformat: Startcode | with STX / without STX |
| Übertragungsformat: Datenlänge | 7 bits / 8 bits |
Produktbeschreibung
FP0H Communication Cassette. 2 RS232C Ports (3 wires)
Hauptmerkmale
- Qualität in Industrieklasse
- RoHS-konform
- CE-zertifiziert
- 1‑Jahresgarantie
Produktdokumente
Datenblatt
Technische Spezifikationen und Leistungsdaten
Benutzerhandbuch
Installations- und Betriebsanleitung
