


| Parameter | Wert |
|---|---|
| LED (green): Power / LED (yellow): (S1/S2) / LED (red): Failure | |
| EAN | 4048879063548 |
| PIN 1 | (+) |
| PIN 2 | Port 1...7: (NO)/(S2); Port 8: diagnostic |
| PIN 3 | (-) |
| PIN 4 | (NO)/(S1) |
| PIN 5 | (Earth) |
| eClass | 27279219 |
| Gehäuse | Zinc die casting, matte nickel plated |
| Schutz | IP65, IP67, IP68 inserted and tightened (EN 60529) |
| LED-Anzeige | LED (green): P1 and P2; LED (red): ERROR for optical diagnostics |
| Gesamtstrom | max. 10 A |
| Verpackungseinheit | 1 |
| Einschaltkapazität | max. 1470 µF |
| Einheitenschutz | Short-circuit, overload (PNP switching) |
| Sperren der Ports | Screw thread (M12×1 mm) |
| Diagnoseausgabe | active high, max. load 25 mA, M23 - PIN 18 |
| Betriebsspannung | 24 V DC (EN 61131-2) |
| Temperaturbereich | -20...+60 °C |
| Ursprungsland | CZ |
| Abmessungen H×B×T | 145×55×21 mm |
| Aktueller Verbrauch | max. 35 mA |
| LED-Anzeige pro Port | LED (yellow): contact 4 and 2; 2× LED (red): for failure |
| Zolltarifnummer | 85369010 |
| Funktionsbeschreibung | All M12 ports are current monitored regarding 0 V total current (contact 3), and are switched off in case of overload or short-circuit (self-resetting). Operating voltage remains the same. In case of a fault the DIAGNOSTIC signal “active high” to the PLC |
| Betriebsstrom (Kontakt 3) | max. 0.5 A (shutoff 0.7...0.9 A) |
| Erforderliches Netzteil mit maximaler Anzahl an Anschlüssen | min. 10 A |
Technische Spezifikationen und Leistungsdaten
Installations- und Betriebsanleitung